Mechanical Engineering

Research Publications


List of Research Publications(Journals Both National and International ) by Faculty

 

Details of Publications
2010-11

M.V.Rao, S.Vijay, J.laxmi lalitha, A.gopala Krishna, “Geometry based volume   reduction of support material for rapid prototyping processes”,Journal of manufacturing Technology today,  vol.10, pp.11-16 April2011.

Iftekhar Hussain.B, Mir Safiulla, “Study on Mould Expansion in Rapid Tooling”,  International Journal of Applied Engineering Research, vol. 6, No. 5 pp.977-986 ,2011 .

2011-12

 S.Vijay, Dr. A. Gopala Krishna, M. Venkateswara Rao. “Application of design of experiments (DOE) to simulate selective laser melting process for optimum temperature distribution”,  Indian Journal of Engineering (online). vol.1, pp. 4-7, Nov 2012.

Ch. Aswini Kumar, G. Pattabhi, S.Santosh, I.Bhanu Latha,  M.Venkateswara  Rao,
“Analysis of adhesively bonded double lap joint in laminated FRP composites   subjected to longitudinal loading” International Journal of Engineering Science and Advanced Technology,vol.2,Issue-2, pp. 307-316 , 2012.  

B Ravi Shankar, “Nanofluid Thermal conductivity-A Review” International Journal of Advances in Science and Technology”,  vol.3, No.3, 2012.

B Ravi Shankar, “Experimental investigation on stability of Al2O3- Water Nanofluid using response surface methodology”, International Journal of Nanoscience and Nanotechnology, vol.3, No.3, pp.120-160, 2012.   

S.Vijay, A. Gopala Krishna, Dr. M. Venkateswara Rao, “Application of design of experiments (DOE) to simulate selective laser melting process for optimum temperature distribution”, Indian Journal of Engineering (online).vol.1, pp.4-7, Nov 2012.

A Praveen, "Analysis on Heat Transfer in Nanofluids for Al2O3/water” IJASRT vol.2, Issue 2, April 2012.

A Praveen, "Experimental Investigation on Analysis of Heat Transfer in Nanofluids for Copper/water" IJETED vol.4, Issue 2, May 2012.

2012-13

G.HanumanthaRao, S.Vijay,  M.Venkateswara Rao,“Transient Heat transfer analysis  for optimum temperature distribution to reduce Thermal stresses”,International Journal of Engineering Research &Technology, vol.1, Issue 6,August 2012.

G.Ganakiram, S.Vijay, M.Venkateswara Rao, “Analysis of temperature distribution of different welded joints in ship building”,  International Journal of Engineering Research &Technology, vol.1, Issue 6, August- 2012.

 Ch.Mastanamma, K.Prasada Rao, M.Venkateswara Rao, “Design and Analysis of Progressive Tool”, International Journal of Engineering Research &Technology, vol.1, Issue 6, August 2012.

P.Rambabu, D.Vijay Praveen, M.Venkateswara Rao, “Optimization of Locomotive wheel  by using FEM”, International Journal of Engineering Research &Technology, vol.1,Issue 5, July 2012. 

S. Vijay, A. Gopala Krishna, M. Venkateswara Rao “Application of design of experiments (DOE) to simulate selective laser melting process for optimum temperature distribution”, Indian Journal of Engineering (online). VOL.1, 4-7, NOV 2012.

Ch. Lakshmi Srinivas, M.M.M.Sarcar, K.N.S. Suman, Influence of Graphite Filler On the Mechanical And Abrasive Wear Properties Of Polyamide6/Graphite Polymer Composites”, International Journal of Composite materials and Manufacturing, vol.2, No.2, pp 28-34,2012.

P.Umamaheswar Rao, S.Vijay, J.Laxmi lalitha, Ch. Lakshmi Srinivas,Experimental Investigations to enhance the heat transfer in intube vapor phase R-12 flow using part length twisted tapes”, International Journal of Thermal Science and Engineering, vol.2, no3, pp 1-10, 2012

Ameer Fareed Basha Shaik, Ch. Lakshmi Srinivas,Structural and Thermal Analysis of Disc brake with and without cross drilled Rotor of Race Car”, International Journal of Advanced Engineering Research and Studies,vol.1, pp 39-43, 2012.

Ch. Lakshmi Srinivas, M.M.M.Sarcar, K.N.S. Suman, Abrasive Wear Properties Of Graphite Filled Pa6 Polymer Composites”, International Journal of Mechanical Engineering and Robotics Research,vol.1, No.3, pp 157-162, 2012.

G. Janakiram, S. Vijay, M. Venkateswara Rao. “Analysis of Temperature distribution of different welded joints in ship building”, Int. J. of Engineering Research & Technology, vol.1 issue 6, Aug-2012.

D vijay Praveen,“Optimization of Locomotive wheel by using finite Element Technique”
IJERT, vol.1 Issue 5, Jul 2012.  

Johny Shaida Shaik, K.Rajasekhara Babu ,prediction of surface roughness in hard turning by using fuzzy Logic., International Journal of Emerging Trends in Engineering and Development., vol.5, Issue 2, July 2012.

2013-14

B Ravi Shankar,” Parametric Analysis of Friction Stir Welding on AA6061 Aluminum Alloy”, International Journal of Mechanical Engineering Research, vol.3 No.5, pp. 557-563, September 2013.

 B Ravi Shankar, “First Law and Second Law Analysis of Gas Turbine Plant”, International Journal of Mechanical Engineering Research, vol.3 No.4, pp. 415-420, September 2013.

B Ravi Shankar ,“Exergy Analysis of Gas Turbine Power Plant",  IJETT International Journal of Engineering Trends and Technology, vol.4, issue 9, pp. 3991-3993,  September 2013.

B Ravi Shankar ,“Thermodynamic Analysis of Gas Turbine Power Plant”, International Journal of Mechanical Engineering Research & Applications, vol.1 (04), pp. 73-77, September 2013.

B Ravi Shankar,” A Genetic Algorithm based Optimising Scheme to enhance the performance of Automobile Radiator”, International Journal of Lean Thinking, vol.4 No.2, pp. 33-42, December 2013.

 B Ravi Shankar, “Influence of Nanoparticle Volume Fraction, Particle size and Temperature on Thermal Conductivity and Viscosity of Nanofluids - A Review” International Journal of Automotive and Mechanical Engineering ,vol.8, pp. 1329-1352, December 2013.

Ch. Lakshmi Srinivas, M.M.M.Sarcar, K.N.S. Suman, M.krishna,Effect of Graphite filler on the Abrasive wear behavior of polyamide66 based composites using Taguchi methodology”, International Journal on Advanced Materials and Technologies, vol.1, pp. 95-100, 2013.

Ch. Lakshmi Srinivas, M.M.M.Sarcar, K.N.S. Suman, K.R.Prakash,Dry Sliding wear behavior of Graphite filled polyamide66 composite material”, International Journal of Materials Engineering and Technology,vol.10, pp. 9-18, 2013.

Ch. Lakshmi Srinivas, M.M.M.Sarcar, K.N.S. Suman, K.R.Prakash,An Investigation in to the effects of Graphite particles on the damping behavior of PA66 composite material”, IJMST International Journal of Materials Sciences and Technology, vol.3, pp20-56, 2013.

S.Vijay and Ch. Srinivasa Rao. “Simulated Optimum temperature distribution of selective laser melting process using Design of Experiments”,  Manufacturing Technology Today, vol.1 issue 11, pp 5-12, Nov 2013.

B.Iftekhar Hussain, Mir Safiulla, Mohamed Ali, G.Suresh, “Injection Mould Tool Design of Power Box Side Panel”, International Journal of Innovative Research in Science, Engineering and Technology, vol.3, Issue 2, pp. 9695-9701, February 2014.

2014-15

B Ravi Shankar “Drilling of laminated composites” Journal of Basic and Applied Engineering Research, vol.1, No.3, pp. 19, October 2014.

B Ravi Shankar “Design Optimization of Heat Exchanger based on Exergy Analysis” JMSME Journal of Material Science and Mechanical Engineering, vol.2, No.3, pp. 18, Oct-2014

B.Ravi Sankar, P.Umamaheswar rao, “Drilling of laminated composites” Journal of Basic and Applied Engineering Research, vol.1, No.3, pp 19, October 2014.

 Seelam Krugon, Dega Nagaraju, S. Narayanan “Optimality of Cycle Time and Inventory Decisions in a Two Echelon Inventory System under Credit Period”, Procedia Engineering, vol. 97,Pages 2269-2278, Dec 2014.

2015-16

K.Balakrishna Reddy, M. Venkateswara Rao, “Analysis of adhesively bonded inner tapered double lap joint in laminated FRP composites subjected to transverse loading”,International Journal for Scientific Research & Development, vol.3, Issue 05, 2015.

K.Balakrishna Reddy, M. Venkateswara Rao, “Analysis of adhesively bonded inner tapered double lap joint in laminated FRP composites subjected to longitudinal loading”,  IAETSD International Conference On Advances In Engineering Research, vol.3, Issue 05, 2015.

A.sivanagaraju, S.Krugon, M.Venkateswararao.,“Stress Analysis of Process Pipe Line Systems (ASME B 31.3) In a Plant Using Caeser-II”,  IJEDR International Journal of Engineering Development and Research, vol.3, Issue 3, 2015.

Ch.Goutham, D.Vijay Praveen, M.Venkateswara Rao, “Analysis of Plates Welded With Stiffeners under Harmonic Loading”, International Journal for Scientific Research & Development,vol.3, Issue 05, 2015.

N.Bhavya, V. Srinivasulu, Dr. M.Venkateswara Rao, “Optimization of Process Parameters for Friction Stir Welding on AA6061-Coconut Ash Particulate Reinforced Metal Matrix Composite Using GRA” IJSRD International Journal for Scientific Research & Development, vol.3, Issue 05, 2015.

B Ravi Shankar, “Optimization of Milling Process on Jute Polyester Composite using Taguchi based Grey Relational Analysis coupled with Principle Component Analysis”, Procedia Materials Today,vol.2, pp. 2522– 2531, 2015.

B.Ravi Sankar, P.Umamaheswarrao, V.Srinivasulu, G.Kishore Chowdari, “Optimization of Milling Process on Jute Polyester Composite using Taguchi based Grey Relational Analysis coupled with Principle Component Analysis”, Materials Today: Proceedings, vol.2, pp. 2522– 2531, 2015.

A.Sivanagaraju, S.Krugon, M.Venkateswararao. “Stress Analysis of Process Pipe Line Systems (ASME B 31.3) In a Plant Using Caeser-II.”, International Journal of Engineering Development and Research, vol.3, Issue 3, 2015.

D Vijay Praveen“Analysis of Plates Welded With Stiffeners under Harmonic Loading” IJSRD vol.3, Issue 05, Oct 2015.

M.Srinadh, K. Rajasekhara Babu., “Static and Thermal Analysis of Piston and Piston Rings”, International Journal of Engineering Technology, Management and Applied Sciences,vol.3, Issue 8, August 2015.

List of Conference Publications  (Both National and International) by Faculty
Details of Publications
2010-11

Ch. Lakshmi Srinivas “A Green light to plastic waste” was published at UGC sponsored, APPCB Co-ordinated two day National Conference VRS & YRN College, Chirala, on 22 & 23 October, 2010.

 S.Vijay, J.Laxmi Lalitha, P.Umamaheswarrao, M.V.Rao “Effect of Raise in Temperature over Bending      of HSS tool in Turning - an Analysis using FEM”, Poster Presentations of the 3rd Intl. & 24th AIMTDR Conference, AUCE (A), Visakhapatnam, INDIA, December 2010.

Iftekhar Hussain.B, Mir Safiulla, “Study on Mould Expansion in Rapid Tooling”, Proceedings of the National Conference on Design and Manufacturing (NaConDM 2011) held at Indian Institute of Technology, Madras from 27-28 May 2011.

J .Laxmi Lalitha ,V. Madhusudanan Pillai. “Manufacturing Execution System”, at 4th International Doctoral Thesis Conference held at IBS, Hyderabad, on 24-25th September, 2010.

2011-12

Dr.M.Venkateswara Rao, B.Iftekhar Hussain, I.Bhanulatha, I.Prasanna, “Interfacial stresses  and deformations of an adhesive bonded double strap scarf joint subjected to longitudinal loading”, Proceedings of the National Conference on Advances in Mechanical Engineering (NCAME 2012), Bapatla Engineering College, Bapatla, A.P, 27 Mar 2012. 

 Ch. Lakshmi Srinivas “Application of FEM in the in the analysis of Centrifugal Blower assembly-A case study” was published in ICRIT-2012 (International Conference on Recent Innovations in Technology) RIT, Kottayam, from 12th January 2012 to 14th January 2012.

Ch. Lakshmi Srinivas “Reverse Engineering and basic process of Rapid prototyping” was published at Modern Trends in Mechanical Engineering (MTME-2012), a two day National Conference, Gandhi Institute of Engineering and Technology, Gunupur, on 18 & 19 February, 2012.

Ch. Lakshmi Srinivas “ Role of Graphite Micro Particles on the Tribological Properties of Polyamide 6 Polymer Composites”  was published at ICRAM-2012 (International Conference on Recent Trends in Advanced Materials), VIT, Vellore from 20th February 2012 to 22th February 2012

CH. Lakshmi Srinivas, S.Vijay “Application of FEM in the in the analysis of Centrifugal Blower assembly-A case study”, ICRIT-2012 (International Conference on Recent Innovations in Technology),RIT, Kottayam, from 12th January 2012 to 14th January 2012.

Lakhsmi Srinivas, Siva Sankar Raju, B.Iftekhar Hussain, “Reverse Engineering and basic process of Rapid Prototyping”, Proceedings of the National Conference on Modern Trends in Mechanical Engineering, at G.I.E.T, Gunupur, Odisha, pp 126-131, from 18-19 Feb 2012.

B.V.Bhargavi, Iftekhar Hussain, Dilli Babu, Mir Safiulla, M.Venkatewara Rao, “Delamination Analysis of Drilled Natural Fiber Reinforced Composite Materials”, Proceedings of the International Conference on Mechanical and Industrial Engineering (ICMIE - 2012) organized by Interscience Open Access Journals (IOAJ) held at Bangalore on 22nd July 2012.

B.V.Bhargavi, Iftekhar Hussain, Dilli Babu, Mir Safiulla, M.Venkatewara Rao, “Delamination Analysis of Drilled Natural Fiber Reinforced Composite Materials”, Proceedings of the International Conference on Mechanical and Industrial Engineering (ICMIE - 2012) organized by Interscience Open Access Journals (IOAJ) held at Bangalore on 22nd July 2012.

2012-13

 D.Sowjanya jessy, k.Rajasekharababu, Dr.M.Venkateswara Rao, “Pneumatic actuator modeling for optimization of Mechatronic Systems”, International Conference on Mechanical and Industrial Engineering (ICMIE), Bangalore, 22nd july, 2012.

 M.Suresh, K.Poornima, Dr.M.Venkateswara Rao, “Elephant Grass Fiber Hybrid Composites”, International Conference on Mechanical and Industrial Engineering (ICMIE),Bangalore,22nd july,2012.

P.Purna Suresh , S.Ravi  Kumar,Dr.M.Venkateswara rao, “Analysis of the influence of WEDM Parameters on surface roughness and material removal rate of Tungsten Carbide”, International Conference on Mechanical and Industrial Engineering (ICMIE),Bangalore,22nd july,2012.

J .Laxmi Lalitha ,V. Madhusudanan Pillai. “Lot streaming in Flow shop: A simulation using Arena software” ICCOMIM-2012, M.S. Rammaiah Institute of   Technology, Bangalore, pp.411-416, July 11-13 2012.

2013-14

Dr.M.Venkateswara Rao., “Evaluation of tribological properties of bamboo-glass hybrid fiber reinforced    polymer composite”  in the NTC-2014 Conference Proceedings,  PES Institute of technology, Banashankari Stage III, Dwaraka Nagar, Banashankari, Bengaluru, 2014.

B.Iftekhar Hussain, Mir Safiulla, D.L.Komala Rao, “ Estimation of Cost for producing an Exhaust Fan through Injection Moulding and Comparison with Rapid Tooling”, Proc. of the Intl. Conf. on Advances In Engineering And Technology - ICAET-2014, held at Roorkee, India organized by IRED, California, U.S.A, pp. 385-389, 24-25 May 2014.

B.Iftekhar Hussain, Mir Safiulla, D.L.Komala Rao, “Computer Aided Design and Development of Tool for Manufacturing an Exhaust Fan”, Proc. Of the Intl. Conf. on Advances In Engineering And Technology – ICAET-2014, held at Roorkee, India organized by IRED, California, U.S.A,  pp. 390-393, 24-25 May 2014.

2014-15

Suresh.G, Vasu.V, M.Venkateswara Rao,“Effect of HNT CLAY Loading on Mechanical and Thermal properties of PTFE NANOCLAY COMPOSITES for Solid lubrication”, International Conference on Advanced in Tribology, NIT Calicut ,Feb 21-24, 2014 (ICAT 2014).

Suresh.G, Vasu.V, M.Venkateswara Rao, “Property Characterization of fluorinated thermoplastic Nano Composites for tribological applications”, International conference on advancements in polymeric materials, February 14 - 16, 2014 at CIPET Bhubaneswar (APM 2014).

B Ravi Shankar, “Experimental investigations on hardness and tensile strength of friction stir welded joint on AA6061 alloy”, Proceedings of International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, MANIT, Bhopal, volume 1, pp. 199-204, Nov 2014.

B Ravi Shankar“Optimizing Drilling Parameters to Minimize Delamination in Drilling of Carbon Fiber Reinforced Plastic Composite Using  Response Surface Methodology”, Proceedings of Indo-Brazil Bilateral International Conference on Advanced Materials and Manufacturing–ICAMM 2015, Tirunelveli, March 27-28, 2015.

B Ravi Shankar, P.Umamaheswarrao, V.Srinivasulu, G.Kishore Chowdari,  “Optimization of Milling Process on Jute Polyester Composite using Taguchi based Grey Relational Analysis coupled with Principle Component Analysis”, 4th International Conference on Materials Processing and Characterization, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad, Mar 27-28, 2015.

B.Ravi Sankar, P.Umamaheswarrao, “Experimental investigations on hardness and tensile strength of friction stir welded joint on AA6061 alloy”, Proceedings of International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, MANIT, Bhopal, volume 1, pp. 199-204, Nov 2014.

B.Ravi Sankar, P.Umamaheswarrao, “Optimization Of Friction Stir Welding On AA6061 Alloy Using Response Surface Methodology Coupled With Grey Relational Analysis And Entropy Method”, Proceedings of International Conference on Advances in Production and Industrial Engineering (INCAPIE 2015), NIT Trichy, pp.198-203, Feb 20-21, 2015.

B.Iftekhar Hussain, Mir Safiulla, “Product design And development through Additive Manufacturing Technology”, Proceedings of the National Conference on Recent Trends in Mechanical Engineering” (NATCON-15) at Ghousia College of Engineering, Ramanagaram, Karnataka on 21st May 2015.

Naru Mohan, J.Laxmi Lalitha, V.Madhusudanan Pillai, “Lot streaming in Two-stage Hybrid flow shop”, presented at ICCME-2015, SCMS, Kochi, Kerala. (Proceedings yet to arrive), 10th – 13th August, 2015.

Sibi T Muraleedharan, J.Laxmi Lalitha, V. Madhusudanan Pillai. “Performance Analysis of Flow Shop Production System under Lot Streaming”, presented at ICCME-2015, SCMS, Kochi, Kerala. (Proceedings yet to arrive), 10th – 13th August, 2015.

Seelam Krugon , Dega Nagaraju ,S.Narayanan, “Optimality of Cycle Time and Inventory Decisions in a Two Echelon Inventory System under Credit Period” during 3 day International Conference on ‘‘Global Congress on Manufacturing and Management ’’ at VIT , Vellore on GCMM(2014) Dec 8-10 2014.

2015-16

B Ravi Shankar “Response Surface Method Based Analysis of Thrust Force During Drilling Of Carbon Fiber Reinforced Plastic Composite” Proceedings of International Conference on Industrial Engineering (ICIE-2015), SVNIT, Surat, (Accepted for presentation), Nov 26-28, 2015.

B Ravi Shankar “Investigations on the Forces During Hard Turning of AlSi52100 Steel” Proceedings of International Conference on Trends in Industrial & Mechanical Engineering (ICTIME-2016), MANIT, Bhopal, (Accepted for presentation), Feb 4-6, 2016.
B Ravi Shankar “Investigations on the Surface Roughness of Drilled Hole on  Carbon Fiber Reinforced Plastic Composite” Proceedings of International Conference on Trends in Industrial & Mechanical Engineering (ICTIME-2016), MANIT, Bhopal, (Accepted for presentation) Feb 4-6, 2016.

B. Ravi Sankar, P.Umamaheswarrao, G. Kishore Chowdari, M.Venkateswararao, “Optimizing Drilling Parameters to Minimize Delamination in Drilling of Carbon Fiber Reinforced Plastic Composite Using  Response Surface Methodology”, Proceedings of Indo-Brazil Bilateral International Conference on Advanced Materials and Manufacturing–ICAMM 2015, Tirunelveli, March 27-28, 2015.

B. Ravi Sankar, P.Umamaheswarrao “Response Surface Method Based Analysis of Thrust Force During Drilling Of Carbon Fiber Reinforced Plastic Composite” Proceedings of International Conference on Industrial Engineering (ICIE-2015), SVNIT, Surat, Nov 26-28, 2015. (Accepted for presentation)

B. Ravi Sankar, P.Umamaheswarrao “Investigations on the Surface Roughness of Drilled Hole on Carbon Fiber Reinforced Plastic Composite” Proceedings of International Conference  on Trends in Industrial & Mechanical Engineering (ICTIME-2016), MANIT, Bhopal, Feb 4-6, 2016. (Accepted for presentation)

Y Narendra babu, Dr.M.Venkateswara Rao. “Enhancement of ABS/PC – HNT Nanocomposites” .NANO-15 conference which will be held at KSR, Tiruchengode, India during December 07-10, 2015 (accepted for presentation).

 Y Narendra babu, Dr.M.Venkateswara Rao “Fabrication and Mechanical Testing of ABS/PC – HNT Nanocomposites”. 4th International Conference on Advanced Nano materials and Nanotechnology (ICANN-2015)(accepted for presentation)

Y Narendra babu, Dr.M.Venkateswara Rao “ENHANCEMENT OF MECHANICAL PROPERTIES OF ABS/PC - HNT NANO COMPOSITES" has been accepted for presentation at NANOS 2015 GITAM University.

D Vijay Praveen “Harmonic Analysis of plates welded with Stiffeners” ICAER 2015 proceedings of the International Conference on Advances in Engineering Research, Vijayawada ,Jul 2015.