| S.No. | Authors | Title of the paper | Name of the journal | Year | Volume and issue | Page No. from - to | Indexing (SCI/ Scopus) | Impact factor/ cite score |
| 1 | Sri. A. Praveen | A Comparison of Coated and Uncoated Diesel Engine Performance and Emission Characteristics Powered by Chlorella Vulgaris Biodiesel Blend with an Assistance of Alumina Nano Additive | SAE International | 2022-23 | 21 | 9 | SCOPUS | 0.53 |
| 2 | Sri. A. Praveen | Comparative assessment of MWCNTs and alumina nanoparticles dispersion in biodiesel blend on the engine characteristics of an unmodified DI diesel engine | Materials Today: Proceedings | 2022-23 | 68 | 1241-1251 | SCOPUS | 2.59 |
| 3 | Dr. T. Nancharaiah | Flapwise Vibration of Functionally Graded Rotating Tapered Beam with Tipmass | Sigma Journal of Engineering and Natural Sciences | 2022-23 | 40 | 640-648 | SCOPUS | 0.6 |
| 4 | Dr. Ch. Lakshmi Srinivas | Estimation of Effect of Cold Forging Deformational Behavior on Al-2024 Alloy Reinforced with Fly-Ash Particulates | Advances in Science and Technology | 2022-23 | 120 | 3-14 | Google Scholar | - |
| 5 | Dr. Ch. Lakshmi Srinivas | Investigations on Wear and Friction Characteristics of AA-2024/MOS2/Al2O3 HMMCs | Advances in Science and Technology | 2022-23 | 120 | 41-50 | Google Scholar | - |
| 6 | Dr. Ch. Lakshmi Srinivas | WEDM Parametric Study on Machining Responses of AA-6082/MoS2/Al2O3 HMMCs | Advances in Science and Technology | 2022-23 | 120 | 117-124 | Google Scholar | - |
| 7 | Dr. D. Sameer Kumar | Micro Structural and Hardness Study of Al 6065 and CaSiO3 Composite with Stir Casting Route | Advances in Science and Technology | 2022-23 | 120 | 75-79 | Google Scholar | - |
| 8 | Dr. D. Sameer Kumar | Particulate Based AZ91 Magnesium Hybrid Composites – A Short Review | Advances in Science and Technology | 2022-23 | 120 | 51-59 | Google Scholar | - |
| 9 | Dr. D. Sameer Kumar | Flapwise vibration of functionally graded rotating tapered beam with tipmass | Sigma Journal of Engineering and Natural Sciences | 2022-23 | 40 | 640-648 | SCIE | 0.233 |
| 10 | Mr.D.Vijay Praveen | Microstructural, Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive Applications | SILICON | 2022-23 | 15 | 5283-5291 | SCIE | 2.941 |
| 11 | Dr.B.Ratna Sunil | A review on developing high performance ZE 41 magnesium alloy by using bulk deformation and surface modification methods | Journal of Magnesium alloys | 2022-23 | 11(3) | 776-800 | SCIE | 17.8 |
| 12 | Dr.B.Ratna Sunil | Wear and corrosion behaviour of the cryogenically treated tungsten carbide coatings | Surface Engineering | 2022-23 | In Press | SCIE | 2.45 | |
| 13 | Dr.B.Ratna Sunil | Reciprocating sliding wear behaviour of the heat-treated WC-12Co coatings | I Mech E Part J: Journal of Engineering Tribology | 2023 | 237(4) | 798-807 | SCIE | 1.8 |
| 14 | Dr.B.Ratna Sunil | Temperature-dependent wear characteristics of ZE41 magnesium alloy under air and inert environments | Material Science and Engineering Technology | 2023 | In Press | SCIE | 1.03 | |
| 15 | Dr.B.Ratna Sunil | Role of processing temperature on microstructure, mechanical properties, and corrosion behavior of fine grained AZ31 magnesium alloy produced by groove pressing | Material Science and Engineering Technology | 2023 | In Press | SCIE | 1.03 | |
| 16 | Dr.B.Ratna Sunil | Effect of argon gas environment on high temperature sliding wear characteristics of NiCrBSi laser clad | Materials Today: Proceedings | 2023 | 78 | 682–687 | Scopus | 1.2 |
| 17 | Dr.B.Ratna Sunil | Comparative investigations on the bioactivity of surface grain refined titanium and surface oxidized titanium for biomedical implant applications | Biointerface Res. Appl. Chem. | 2023 | 13 (4) | 318 | Scopus | 1.0 |
| 18 | Dr.B.Ratna Sunil | Temperature dependant sliding wear behaviour of Stellite 6 alloy | Materials Today: Proceedings | 2022-23 | 78 | 514-519 | Scopus | 1.2 |
| 19 | Dr.B.Ratna Sunil | Magnesium based alloys and composites: Revolutionized bio degradable temperary implants and strategies to enhance their performance | Materialia | 2022-23 | 27 | 101680 | SCIE | 3.59 |
| 20 | Dr.B.Ratna Sunil | Effect of AC/DC electrical fields on ZnO nano particles kinetics | Acta fytotechnica et zootechnica | 2022-23 | 25 | 4 | Scopus | 0.452 |
| 21 | Dr.B.Ratna Sunil | Microstructure, mechanical properties and corrosion behaviour of rate earths (RE) containing Mg-Zn alloy for bio medical applications | Materials Today: Proceedings | 2022-23 | -- | In Press | Scopus | 1.2 |
| 22 | Dr.B.Ratna Sunil | Effect of inert environment on the sliding wear behaviour of the HVOF sprayed WC-12Co Coating | International Journal of Refractory Metals and Hard materials | 2022-23 | 111 | 106109 | SCIE | 4.804 |
| 23 | Dr.B.Ratna Sunil | Tribological Characteristics of WC-12Co coating sliding against SiC and SiN Counter balls | SILICON | 2022-23 | 15(8) | 1-10 | SCIE | 2.941 |
| 24 | Mr.Y Narendra babu | Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions | Material science and engineering technology | 2022-23 | In Press | SCIE | 1.0 | |
| 25 | Dr.S.Krugon | Microstructural, Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive Applications | SILICON | 2022-23 | 15 | 5283-5291 | SCIE | 2.941 |
| 26 | Mr.P.Uma maheswara Rao | Microstructural, Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive Applications | SILICON | 2022-23 | 15 | 5283-5291 | SCIE | 2.941 |
| 27 | Mr.D.Vijay Praveen | Investigations on Wear and Friction Characteristics of AA-2024/MOS2/Al2O3 HMMCs | Advances in Science and Technology | 2022-23 | 120 | 41-50 | Google Scholar | - |
| 28 | Mr.D.Vijay Praveen | WEDM Parametric Study on Machining Responses of AA-6082/MoS2/Al2O3 HMMCs | Advances in Science and Technology | 2022-23 | 120 | 117-124 | Google Scholar | - |
| 29 | Sri. A.Praveen | Optimization of Operational Parameters on Engine Performance and Emissions of a Diesel Engine Powered with Mimusops Elengi Methyl Ester with Doped TiO2 Nanoparticle with Varying Injection Pressure | SAE Technical Paper | 2022-23 | 28 | 1-12 | Scopus | 0.53 |
| 30 | Sri. A.Praveen | Dispersion Effect of Al2O3 Nanoparticles in Diesel and Hemp Biodiesel Blend on the Engine Parameters of a Diesel Engine | AIP Conference Proceedings | 2022-23 | 2648 | 1-7 | Scopus | 0.189 |
| 31 | Sri. A.Praveen | Comparative assessment of MWCNTs and alumina nanoparticles dispersion in biodiesel blend on the engine characteristics of an unmodified DI diesel engine | Materials Today: Proceedings | 2022-23 | 68 | 1241-1251 | Scopus | 1.2 |
| 32 | Dr.T.Nancharaiah | Experimental optimization on mechanical properties of 18Ni-300 maraging steel produced by direct metal laser sintering | Engineering Research Express | 2022-23 | 5-1 | 015073 | SCIE | 1.47 |
| 33 | Sri S.Vijay | Optimal Surface Finish of Material Extrusion 3D Printed Products Using Ultimaker Cura Interface | Advances in Science and Technology | 2022-23 | 120 | 111-116 | UGC | - |
| 34 | M.Venkateswara Rao | Hardness and dry sliding wear behavior of Al7050 Hybrid composites produced by Stir casting | Composite theory and Practice | 2022-23 | 22-3 | 150-159 | ESCI | 0.84 |
| 35 | M.Venkateswara Rao | Mechanical microstructural and tribological behavior of stir cast Al 8011/TiB2/SiC hybrid metal matrix composites’ | Elsevier, Matereials Today Proceedings | 2022-23 | 62-14 | 7446-7454 | SCOPUS | 2.59 |
| 36 | P. Umamaheswa rao | Desirability function analysis based multi response optimization of process parameters during friction stir welding of AA6061-AA7075 | INCAS BULLETIN | 2022-23 | 15-2 | 121-131 | SCOPUS | 0.64 |
| 37 | P. Umamaheswa Rao | Multi-response optimization of process parameters during friction stir welding of AA2014-AA7075 using TOPSIS Approach | INCAS BULLETIN | 2022-23 | 15-2 | 107-117 | SCOPUS | 0.64 |
| S.No. | Authors | Title of the paper | Name of the journal | Year | Volume and issue | Page No. from – to | Indexing (SCI/ Scopus) | Impact factor/ cite score |
| 1 | Sri. S. Vijay | Comparative Experimental Investigation of Erosion ehavior of AA2024/B4C and AA6061/B4C Metal Matrix Composites with Particulate coating | Materials Science and Engineering | 2021-22 | 1017 | 012027 | UGC | 0.50 |
| 2 | Dr. B. Ratna Sunil | Developing Zn-MgO composites for degradable implant applications | Materials Letters | 2021-22 | 302 | 130433 | SCIE | 3.754 |
| 3 | Dr. B. Ratna Sunil | Developing composites of zinc and hydroxyapatite for degradable orthopedic implant applications | IOP Conf. Series: Materials Science and Engineering | 2021-22 | 1116 | 012002 | SCOPUS/ WEB OF SCIENCE | 0.50 |
| 4 | Dr. B. Ratna Sunil | Surface functionalized titanium with enhanced bioactivity and antimicrobial properties through surface engineering strategies for bone implant applications | Current Opinion in Biomedical Engineering | 2021-22 | 23 | 100398 | SCIE | 4.16 |
| 5 | Dr. B. Ratna Sunil | Machining ehavior of AZ91E hybrid composite reinforced with granite and fly Ash powders | Eng. Res. Express. | 2021-2022 | 4 | 015035 | Scopus/ Web of Science | 1.2 |
| 6 | Dr. B. Ratna Sunil | Development Of Rare Earths Containing Magnesium Alloys For Biomedical Applications: A review | Advances in Science and Technology, | 2021-2022, | 120, | 35-40 | Google Scholar | - |
| 7 | Dr. B. Ratna Sunil | Developing Mg based composites for degradable orthopedic implant applications: A review | Advances in Science and Technology, | 2022, | 120, | 61-67 | Google Scholar | -- |
| 8 | Dr. B. Ratna Sunil | Characterization of CP-Ti processed by micro arc oxidation for bone implant applications | Advances in Science and Technology, | 2022, | 120, | 6 | Google Scholar | -- |
| 9 | Dr. B. Ratna Sunil | Dispersion effect of Al2O3 nanoparticles in diesel and hemp biodiesel blend on the engine parameters of a diesel engine | AIP Conference proceedings | 2021-22 | 2648, | 040007 | Scopus | 1.1 |
| 10 | Dr. B. Ratna Sunil | Friction and wear behavior of BN(h) and Ag incorporated nickel phosphorous coatings under dry reciprocating sliding conditions, | Tribology – Materials, Surfaces & Interfaces, | 2021-22 | 16(1) | 23-33 | SCOPUS | 1.5 |
| 11 | Dr. B. Ratna Sunil | Carbide-based thermal spray coatings: A review on performance characteristics and post-treatment, | International Journal of Refractory Metals and Hard Materials | 2021-22 | 103 | 105772 | SCIE | 4.8 |
| 12 | Dr. B. Ratna Sunil | Machining characteristics of Al6063 composites reinforced with SiC particles | Mater Today: proc, | 2021-22 | 50(5) | 2351-2354 | SCOPUS | 1.2 |
| 13 | Dr. B. Ratna Sunil | Investigation on the role of microstructure and temperature on tribological characteristics of fine grained ZE41 Mg alloy | Tribology – Materials, Surfaces & Interfaces | 2021-22 | 16(1) | 68-75 | Scopus | 1.5 |
| 14 | Dr. B. Ratna Sunil | Ravikumar Dumpala, Effect of inert gas environment on the sliding wear behavior of AZ91/B4C surface composite | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 2021-22 | 236(9) | 1880-1888 | SCIE | 1.8 |
| 15 | A Suresh | Role of heat treatment on machining characteristics and surface roughness of AZ91 Mg alloy | Mater Today: proc, | 2021-22 | 50(5) | 2488-2492 | SCOPUS | 1.2 |
| 16 | Sri.S. Ravi Kumar | Wear Studies of AZ91-SiC/FA Composites using Taguchi Approach and Artificial Neural Networks (ANN) Fabricated by Stir-Casting | Design Engineering | 2021-22 | 2021 | 2531-2555 | SCOPUS | 0.101 |
| 17 | Sri.S. Ravi Kumar | Wear Behaviour of Magnesium Metal Matrix Hybrid Composites –A Detailed Review | International Journal of Mechanical Engineering | 2021-22 | 7 | 1488-1499 | SCOPUS | 2.1 |
| 18 | Sri. P. Uma Maheswar Rao | Machining force comparison for surface defect hard turning and conventional hard turning of AISI 52100 steel | Incas Bulletin | 2021-22 | 13(3) | 205 – 214 | SCOPUS | 0.335 |
| 19 | Dr. P. Ravi Kumar | Multi response optimization of process parameters in wire-cur EDM on INCONEL 625 | Materials Today | 2021-22 | 47(19) | 6960-6964 | SCOPUS | 1.2 |
| 20 | Dr. D. Sameer Kumar | Preparation And Characterization Of Electroless Ni Coated Nano Alumina Powder Under Different Sensitization – Activation Conditions | Metallurgical and Materials Engineering Association of Metallurgical Engineers of Serbia AMES | 2021-22 | 27 | 275-287 | ESCI, WEB OF SCIENCE | 0.9 |
| 21 | Dr. D. Sameer Kumar | Effectiveness of Shannon Entropy Weight Method on Wear Behaviour Of Polyester/Carbon Fibre Composites Using GRA | Annales de Chimie – Science des Matériaux | 2021-22 | 46 | 9-17 | ESCI, WEB OF SCIENCE | 0.8 |
| 22 | Dr. D. Sameer Kumar | A Real-Time Autonomous Face-Tracking System Based On A 2-Dof Articulated Manipulator Platform Using Extended Kalman Filter | Acta Mechanica Malaysia (AMM) | 2021-22 | 4 | 40-43 | GOOGLE SCHOLAR | - |
| 23 | Dr. Ch. Lakshmi Srinivas | Grey Relational Analysis and Principal Component Analysis Based Optimization Of Process Parameters in Turning of En-8 Steel | INCAS BULLETIN | 2021-22 | 14 | 43-51 | SCOPUS | 0.335 |
| 24 | Sri.S. Ravi Kumar | Wear Studies of AZ91-SiC/FA Composites using Taguchi Approach and Artificial Neural Networks (ANN) Fabricated by Stir-Casting | DESIGN ENGINEERING (TORRONTO) | 2021-22 | 2021/6 | 2531-2555 | SCOPUS | 0.101 |
| 25 | Sri.S. Ravi Kumar | Wear Behaviour of Magnesium Metal Matrix Hybrid Composites –A Detailed Review | International Journal of Mechanical Engineering | 2021-22 | 7 | 1488-1499 | SCOPUS | 2.1 |
| 26 | Dr. T. Nancharaiah | Role of heat treatment on machining characteristics and surface roughness of AZ91 Mg alloy | Materials Today: Proceedings | 2021-22 | 50 | 2488-2492 | SCOPUS | 2.59 |
| 27 | Sri. A.Praveen | Effect of MWCNTs as nano additives in C. Inophyllum biodiesel blend (CIB20) on the performance and emission parameters of a diesel engine | Materials Today: Proceedings | 2021-22 | 50(6) | 2581-2586 | SCOPUS | 2.59 |
| 28 | Dr. T. Nancharaiah | Influence of different build orientation and laser scan strategies on surface quality, Mechanical and Material Characteristics of 18 Ni-300 maraging steel processed through DMLS | Australian Journal of Mechanical Engineering | 2021-22 | 21 | 1-15 | SCOPUS | 0.286 |
| 29 | Sri. A. Praveen | Enhancing diesel engine performance by using nano-dispersing agents in fuel: A review | IOP Conference Series: Materials Science and Engineering | 2021-22 | 1185 | 012039 | SCOPUS | 0.50 |
| 30 | Sri. A. Praveen | An assessment of the TiO2 nanoparticle concentration in the Cinophyllum biodiesel blend on the engine characteristics of a DI diesel engine | International Journal of Ambient Energy | 2021-22 | 43 | 5464-5477 | SCOPUS | 0.421 |
| 31 | Dr. Ch. Lakshmi Srinivas | GREY RELATIONAL ANALYSIS AND PRINCIPAL COMPONENT ANALYSIS BASED OPTIMIZATION OF PROCESS PARAMETERS IN TURNING OF EN-8 STEEL | INCAS BULLETIN | 2021-22 | 14 | 43-51 | WEB OF SCIENCE | 0.335 |
| 32 | Dr.J.Laxmi Lalitha | Effect of lot streaming and dispatching rules in a dynamic flowshop with missing operations | International Journal of Business and Data Analytics | 2021-22 | 2-1 | 33-51 | WEB OF SCIENCE | 0.93 |
| S.No. | Authors | Title of the paper | Name of the journal | Year | Volume and issue | Page No. from - to | Indexing (SCI/ Scopus) | Impact factor/ cite score |
| 1 | Dr. T. Nancharaiah | Effect of Tipmass on Frequency of Functionally Graded Rotating Beam | Journal of Xi'an University of Architecture & Technology, | 2020-21 | XII | 5663- 5668 | Others | 0.41 |
| 2 | Sri.S. Ravi Kumar | Corrosion and tribological behavior of magnesium metal matrix hybrid composites- A review | AIP Conference Proceedings | 2020-21 | 2259 | 1-13 | SCOPUS | 0.89 |
| 3 | Dr. T. Nancharaiah | Influence of Canola Oil on The Emission and Performance Characteristics of Four Stroke Diesel Engine as A Bio Fuel | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2020-21 | 10 | 7127-7134 | SCOPUS | 3.05 |
| 4 | Dr. Ch. Lakshmi Srinivas | Investigation of the effect of micro-fillers on Viscoelastic and Erosion wear Characteristics of PTFE composites | JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES | 2020-21 | 15 | 696-703 | WEB OF SCIENCE | 0.82 |
| 5 | Dr. D. Sameer Kumar | INFLUENCE OF CANOLA OIL ON THE EMISSION AND PERFORMANCE CHARACTERISTICS OF FOUR STROKE DIESEL ENGINE AS A BIO FUEL | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2020-21 | 10 | 7127–7134 | SCOPUS | 3.05 |
| 6 | Dr. D. Sameer Kumar | A study on the impact and fatigue failure of AZ91E–Ni coated alumina composites | CANADIAN METALLURGICAL QUARTERLY | 2020-21 | 59 | 316-323 | ESCI | 0.84 |
| 7 | Sri. S. Krugon | On the Optimality of Inventory and Shipment Policies in a Two echelon Supply Chain under Trade Credit with Finite Production Rate | International Journal of Advanced Science and Technology | 2020-21 | 29 | 3583-3599 | SCOPUS | 0.76 |
| 8 | Sri. S. Krugon | An Integrated Method Using Fuzzy AHP and TOPSIS Method for Supplier Selection in Recycled Lubricating Oil Industry for GSCM | International Journal of Advanced Science and Technology | 2020-21 | 29 | 12473 -12480 | SCOPUS | 0.76 |
| 9 | Dr. P. Ravi Kumar | INFLUENCE OF CANOLA OIL ON THE EMISSION AND PERFORMANCE CHARACTERISTICS OF FOUR STROKE DIESEL ENGINE AS A BIO FUEL | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2020-21 | 10 | 7127-7134 | SCOPUS | 3.05 |
| 10 | Sri. A.Praveen | Nano fluids effect on crossflow heat exchanger characteristics – Review | materials Today: Proceedings | 2020-21 | 44(1) | 527-531 | SCOPUS | 2.59 |
| 11 | Dr. D. Sameer Kumar | RECENT STUDIES ON PARTICULATE REINFORCED AZ91 MAGNESIUM COMPOSITES FABRICATED BY STIR CASTING – A REVIEW | Journal of Mechanical and Energy Engineering | 2020-21 | 4 | 115-126 | GOOGLE SCHOLAR | 2.38 |
| 12 | Sri. P. Uma Maheswar Rao | Application of TOPSIS for multi response optimization of Process Parameters in dry hard turning of AISI 52100 steel | INCAS BULLETIN | 2020-21 | 13 | 211-224 | SCOPUS | 0.64 |
| 13 | Sri. P. Uma Maheswar Rao | EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF CUTTING AND TOOL GEOMETRY PARAMETERS OVER THE MACHINABILITY OF AISI 52100 STEEL IN HARD TURNING | International Journal of Modern Manufacturing Technologies | 2020-21 | XII | 144-156 | SCOPUS | 0.46 |
| 14 | Sri. P. Uma Maheswar Rao | A Review on Submerged Friction Stir Welding of Light Weight Alloys | IOP Conf. Series: Materials Science and Engineering | 2020-21 | 954 | 1-8 | SCOPUS | 0.50 |
| 15 | Dr. B. Ratna Sunil | Machining characteristics, wear and corrosion behavior of AZ91 magnesium alloy - fly ash composites produced by friction stir processing, | Material Science and Engineering Technology | 2020-21 | 52(1) | 88-99 | SCIE | 1.71 |
| 16 | Dr. B. Ratna Sunil | Synthesis, characterization and antimicrobial properties of strontium substituted hydroxyapatite | Journal of the Australian Ceramic Society | 2020-21 | 57 | 195-204 | SCIE | 2.0 |
| 17 | Dr. B. Ratna Sunil | Role of plunge depth on the joint formation and mechanical behavior of Al6063 AZ91 dissimilar lap joint produced by friction stir welding, | Material Science and Engineering Technology | 2020-21 | 52(1) | 111-121 | SCIE | 1.71 |
| 18 | Dr. B. Ratna Sunil | Zinc-calcium silicate composites produced by ball milling and sintering for degradable implant applications | Materials Today: Proceedings | 2020-21 | 44(1) | 1584-1588 | SCOPUS | 2.59 |
| 19 | Dr. B. Ratna Sunil | Developing composites of zinc and hydroxyapatite for degradable orthopedic implant applications | IOP Conf. Series: Materials Science and Engineering | 2020-21 | 1116 | 012002 | SCOPUS | 0.50 |
| 20 | Dr. B. Ratna Sunil | Zinc substituted hydroxyapatite: Synthesis, structural analysis and antimicrobial behaviour | Transactions of the Indian Institute of Metals | 2020-21 | 74 | 2335–2344 | SCIE | 1.391 |
| 21 | Dr. D. Sameer Kumar | Estimation of lattice strain in lanthanum hexa aluminate nanoparticles using X-ray peak profile analysis | Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials | 2020-21 | 31 | 13-19 | GOOGLE SCHOLAR, SCOPUS, SCI / SCIE / ESCI, WEB OF SCIENCE | 0.941 |
| 22 | Dr. P. Ravi Kumar | INFLUENCE OF CANOLA OIL ON THE EMISSION AND PERFORMANCE CHARACTERISTICS OF FOUR STROKE DIESEL ENGINE AS A BIO FUEL | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2020-21 | 10 | 7127-7134 | SCOPUS | 3.05 |
| 23 | Dr. P. Ravi Kumar | Dynamic Analysis Of Hydraulic Actuated Mandrel | Turkish Journal of Computer and Mathematics Education | 2020-21 | 12 | 2675-2685 | SCOPUS | 0.955 |
| 24 | Dr. B. Ratna Sunil | Effect of heat treatment on mechanical and tribological characteristics of Electroless Ni-P deposits | Journal of Physics: Conference Series | 2020-21 | 1355 | 012032 | SCOPUS | 0.48 |
| 25 | Dr. B. Ratna Sunil | Effect of heat treatment on microstructure, microhardness and corrosion resistance of ZE41 Mg alloy | Koroze A Ochrana Materiálu | 2020-21 | 63(2) | 79-85 | SCOPUS | 1.88 |
| 26 | Dr. B. Ratna Sunil | Tuning the Morphology and State of Aggregation of Fullerene C60 Using Non-ionic Surfactants | Colloid Journal | 2020-21 | 83(4) | 474–482 | SCIE | 1.18 |
| 27 | Dr. B. Ratna Sunil | Investigation on the role of microstructure and temperature on tribological characteristics of fine grained ZE41 Mg alloy | Tribology - Materials, Surfaces & Interfaces | 2020-21 | 16 | 68-75 | SCIE | 1.978 |
| 28 | Dr. B. Ratna Sunil | Effect of inert gas environment on the sliding wear behavior of AZ91/B4C surface composite | Journal of Engineering Tribology | 2020-21 | 236(9) | 1880-1888. | SCIE | 1.899 |
| 29 | Dr. B. Ratna Sunil | Zinc-calcium silicate composites produced by ball milling and sintering for degradable implant applications | Materials Today: Proceedings | 2020-21 | 44(1) | 1584-1588 | SCOPUS | 2.59 |
| 30 | Dr. B. Ratna Sunil | Microhardness and frictional characteristics of cryogenically treated carbide coatings | Materials Today: Proceedings | 2020-21 | 47 | 3112-3116 | SCOPUS | 2.59 |
| 31 | Dr. B. Ratna Sunil | Sliding Wear Characteristics of Silver Particles Incorporated Electroless Nickel Phosphorus Composite Coatings | Lecture notes in Mechanical Engineering | 2020-21 | -- | 823-829 | SCOPUS | 0.46 |
| 32 | Dr. B. Ratna Sunil | Effect of Friction Stir Processing on the Sliding Wear Characteristics of AZ91 Mg Alloy | Advances in Mechanical Engineering in: Lecture notes in Mechanical Engineering | 2020-21 | -- | 663-669 | SCOPUS | 0.46 |
| 33 | Dr. B. Ratna Sunil | Effect of cryogenic treatment duration on the microhardness and tribological behavior of 40CrMoV5 tool steel | Materials Today: Proceedings | 2020-21 | 38 | 2140-2144 | SCOPUS | 2.59 |
| 34 | Dr. T. Nancharaiah | Multi response optimization of process parameters in wire-cut EDM on INCONEL 625, | Elsevier, Materials Today: Proceedings | 2020-21 | 47 | 6960-6964 | SCOPUS | 2.59 |
| 35 | Sri.S. Ravi Kumar | Investigation of Microstructures, Mechanical Properties of AZ91E Hybrid Composite Reinforced with Silicon Carbide and Fly Ash | SILICON | 2020-21 | 13 | 2145–2156 | SCIE | 2.941 |
| 36 | Dr. V.V. Kondaiah | Role of plunge depth on the joint formation and mechanical behavior of Al6063-AZ91 dissimilar lap joint produced by friction stir welding | Material Science & Engineering, Materialwiss. Werkstofftech. | 2020-21 | 52 | 111–121 | SCOPUS | 1.037 |
| 37 | Sri. D. Vijay Praveen | Assessment of Optimal Parameters of Wire EDM on Ni‑Coated Al2O3p/ AA7075 MMCs Using PCA Coupled GRA | Arabian Journal of science and technology | 2020-21 | 48 | 7953-7966 | SCIE | 2.807 |
| 38 | Sri. P. Uma Maheswar Rao | Experimental study on drilling force during drilling of AZ91D Magnesium alloy, | Materials Today Proceedings | 2020-21 | 44 | 305-308 | SCOPUS | 2.59 |
| 39 | Dr. V.V. Kondaiah | Role of plunge depth on the joint formation and mechanical behavior of Al6063-AZ91 dissimilar lap joint produced by friction stir welding | Materials science and technology | 2020-21 | 52 | 111-121. | SCOPUS | 1.71 |
| 40 | Dr. V.V. Kondaiah | MECHANICAL BEHAVIOR AND CHARACTERIZATION OF STIR CASTED AZ31-CaSiO3 METAL MATRIX COMPOSITES | International Journal of Mechanical and Production Engineering Research and Development | 2020-21 | 10 | 515–526 | SCOPUS | 3.05 |
| 41 | Dr. V.V. Kondaiah | Corrosion Behaviour of Stir Casted AZ31 Magnesium AlloyCaSiO3 Compositesin an Aqueous Solution | International Journal of Advanced Science and Technology | 2020-21 | 10 | 515–526 | SCOPUS | 0.251 |
| 42 | Sri.S. Ravi Kumar | Review of Magnesium Metal Matrix Composites | Materials Science and Engineering | 2020-21 | 29 | . 2333 - 2345 | SCOPUS | 8.457 |
| 43 | Sri.S. Ravi Kumar | Corrosion and tribological behavior of magnesium metal matrix hybrid composites- A review | AIP Conference Proceedings | 2020-21 | 2259/020018 | 1–13 | SCOPUS | 0.189 |
| 44 | Sri.S. Ravi Kumar | Condition monitoring of roller bearings | AIP Conference Proceedings | 2020-21 | 2281/020001 | 1 - 8 | SCOPUS | 0.189 |
| 45 | Dr. V.V. Kondaiah | EXPERIMENTAL INVESTIGATION OF DRY SLIDING WEAR BEHAVIOUR OF STIR CASTED AZ31 MAGNESIUM ALLOY-CASIO3 METAL MATRIX COMPOSITES | Journal of Critical Reviews | 2020-21 | 7 | 11-19 | SCOPUS | 0.16 |
| 46 | Dr. V.V. Kondaiah | Micro Structural Properties of Stir Casted Az31 Magnesium Alloy-Casio3 Composites | Jour of Adv Research in Dynamical & Control Systems, | 2020-21 | 12 | 2315-2324 | SCOPUS | 1.20 |
| S.No. | Authors | Title of the paper | Name of the journal | Year | Volume and issue | Page No. from - to | Indexing (SCI/ Scopus) | Impact factor/ cite score |
| 1 | Anchupogu Praveen | The combined effect of multi walled carbon nanotubes and exhaust gas recirculation on the performance and emission characteristics of a diesel engine | International Journal of Ambient Energy | 2019-2020 | 40-8 | 791-799 | ESCI | 0.421 |
| 2 | Anchupogu Praveen | Influence of nano additive Chlorella vulgaris microalgae biodiesel blends on the performance and emission characteristics of a DI diesel engine | International Journal of Ambient Energy | 2019-2020 | 43-1 | 2071-2077 | ESCI | 0.421 |
| 3 | P.Umamaheswar rao | A Brief Note on the Application of Surface Defect Machining for Hard Turning | Materials Today: Proceedings | 2019-2020 | 18-7 | 3087-3090 | Scopus | 2.59 |
| 4 | Sri. S. Vijay | A comparative investigation of hardness and compression strength of Nickel coated B4C reinforced 601AC/201AC selective layered functionally graded materials | Materials Research Express | 2019-2020 | 7 | 1-15 | SCIE | 2.025 |
| 5 | Sri. P. Uma Maheswar Rao | Achieving Optimal Parametric Combination for AISI 52100 Steel Hard Turning With Multiple Performance Characteristics Using Integrated RSM and GRA-PCA | International Journal of Modern Manufacturing Technologies | 2019-2020 | 11-2 | 86-95 | Scopus | 1.1 |
| 6 | Sri. P. Uma Maheswar Rao | Achieving optimal process parameters during Hard Turning of AISI 52100 Bearing Steel using Hybrid GRA‐PCA | Key Engineering Materials | 2019-2020 | 818 | 87-1 | Scopus | 0.9 |
| 7 | Sri. S. Krugon | Coordinated Two-echelon Inventory Model for Optimal Cycle Time and Inventory Decisions in a Cubic Price Dependent Demand Rate under Credit Period | Journal of Adv Research in Dynamical & Control Systems | 2019-2020 | 11-3 | 1198-1205 | Other | - |
| 8 | Dr. V.V. Kondaiah | Corrosion Behaviour of Stir Casted AZ31 Magnesium AlloyCaSiO3 Compositesin an Aqueous Solution | International Journal of Advanced Science and Technology | 2019-2020 | 29-5 | 2333-2345 | Scopus | 1.5 |
| 9 | Dr.B.Ratna Sunil | Developing composite of ZE41 magnesium alloy- calcium by friction stir process for biodegradable implant applications | Materials Today: proceedings , (Elsevier, Scopus) | 2019-2020 | 18 | 270-277 | Scopus | 2.59 |
| 10 | Sri. S. Vijay | Dry slide wear behavior of 601AC/B4C Selective layered functionally graded material with particulate Ni-P coating | Materials Research Express | 2019-2020 | 6 | 1-21 | SCIE | 2.025 |
| 11 | Dr.B.Ratna Sunil | Effect of grain refinement on corrosion rate, mechanical and machining behavior of friction stir processed ZE41 Mg alloy | Transactions of the Indian Institute of Metals | 2019-2020 | 72 | 123-132 | SCIE | 1.391 |
| 12 | Dr.B.Ratna Sunil | Effect of heat treatment on microstructure, micro hardness and corrosion resistance of ZE41 Mg alloy | Koroze A Ochrana Materiálu (De-Gruyter, Scopus) | 2019-2020 | 63-2 | 79-85 | Scopus | 1.88 |
| 13 | Dr.B.Ratna Sunil | Effect of heat treatment on the hardness and wear characteristics of NiCrBSi laser clad deposited on AISI410 stainless steel | Materials Research Express, (IOP, SCI) | 2019-2020 | 6-8 | 086524 | SCIE | 2.025 |
| 14 | Dr. D. Sameer Kumar | Effect of Tipmass on Frequency of Functionally Graded Rotating Beam | Journal of Xi'an University of Architecture & Technology | 2019-2020 | 12-6 | 5663-5668 | Scopus | 0.6 |
| 15 | Dr. Ch. Lakshmi Srinivas | EXPERIMENTAL INVESTIGATIONS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN TURNING OF EN 8 STEEL | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2019-2020 | 10-3 | 1769-76 | UGC | - |
| 16 | Sri. S. Ravi Kumar | FAULT DETECTION OF BEARINGS USING CONDITION MONITORING TECHNIQUES | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2019-2020 | 9 | 813-820 | UGC | - |
| 17 | Dr. P. Ravi Kumar | Fault Diagnosis of a Shaft Blade Assembly Using Vibration Response | International Journal of Research and Analytical Reviews (IJRAR) | 2019-2020 | 9-6 | 813–820 | UGC /Others | - |
| 18 | Dr.B.Ratna Sunil | Hardness and sliding wear characteristics of AA7075-T6 surface composites reinforced with B4C and MoS2 particles | Materials Research Express | 2019-2020 | 6-8 | 086589 | SCIE | 2.025 |
| 19 | Sri. D. Vijay Praveen | Influence of nickel coating of Al2O3(P) reinforced AA-7075 metal matrix composites on hardness, impact strength and tensile properties | Materials Research Express | 2019-2020 | 12 | 126537 | SCIE | 2.025 |
| 20 | Sri. S. Ravi Kumar | Innovative and Efficient Electric Braking System In High-Speed Trains using Proportional Resonant Controller | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | 2019-2020 | 9-2 | 1691-1698 | UGC /Others | - |
| 21 | Dr. D. Sameer Kumar | Life Prediction of Spur Gear Under Fully Reversed Loading Using Total Life Approach and Crack-Initiation Method in FEM | Aksaray University Journal of Science and Engineering | 2019-2020 | 3-2 | 82-98 | UGC /Others | - |
| 22 | Dr.B.Ratna Sunil | Magnesium/fish bone derived hydroxyapatite composites by friction stir processing: studies on mechanical behavior and corrosion resistance | Bulletin of Materials Science, (Springer, SCI) | 2019-2020 | 42 | 1-10 | SCIE | 1.9 |
| 23 | Dr. V.V. Kondaiah | MECHANICAL BEHAVIOR AND CHARACTERIZATION OF STIR CASTED AZ31-CaSiO3 METAL MATRIX COMPOSITES | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ; ISSN (E): 2249–8001 | 2019-2020 | 10-2 | 515-526 | Scopus | 0.7 |
| 24 | Dr.MV Rao | Mechanical Characterization of Stir Cast Al-7075/B4C/Graphite Reinforced Hybrid Metal Matrix Composites | Materials Today Proceedings | 2019-2020 | 21-2 | 1104-1110 | Scopus | 2.59 |
| 25 | Dr.B.Ratnal Sunil | Microstructure, mechanical and corrosion properties of friction stir processed ZE41 Mg alloy | Materials Today: proceedings , (Elsevier, Scopus) | 2019-2020 | 15 | 50-56 | Scopus | 2.59 |
| 26 | Sri. P. Uma Maheswar Rao | Multi Objective Optimization of Joining Dissimilar AA5083& AA6061 Alloys Using Friction Stir Welding- Integrated Taguchi and Grey Systems Approach | Materials Science Forum | 2019-2020 | 978 | 133-139 | Scopus | 0.211 |
| 27 | Dr. T. Nancharaiah | Multi objective optimization of process parameters of Al 6061-SiCp metal matrix composite in end milling-Hybrid GRA-PCA approach | Materials Today: Proceedings | 2019-2020 | 26 | 696-700 | Scopus | 2.59 |
| 28 | Dr. D. Sameer Kumar | Optimization of dry sliding wear properties ofAZ91E/ nano Al2O3 reinforced metal matrix composite with grey relational analysis | INTERNATIONAL JOURNAL OF ENGINEERING, SCIENCE AND TECHNOLOGY | 2019-2020 | 11-4 | 41-48 | Scopus | 1.5 |
| 29 | Sri. D. Vijay Praveen | Optimization of machining parameters of wire-cut EDM on ceramic particles reinforced Al-metal matrix composites – A review | Materials Today: Proceedings | 2019-2020 | 23 | 495-498 | Scopus | 2.59 |
| 30 | Dr. T. Nancharaiah | Optimization of process parameters in wire-cut EDM of Inconel 625 using Taguchi’s approach | Materials Today: Proceedings | 2019-2020 | 23-3 | 642-646 | Scopus | 2.59 |
| 31 | P.Umamaheswar rao | Optimizing Cutting Parameters in Hard Turning of AISI 52100 Steel Using TOPSIS Approach | Journal of Mechanical and Energy Engineering | 2019-2020 | 3-3 | 227-232 | Scopus | 1.152 |
| 32 | Dr. D. Sameer Kumar | PERFORMANCE EVALUATION OF SURFACE MODIFIED NANO Al2O3 (p) REINFORCED AZ91E COMPOSITES UNDER IMPACT AND FATIGUE LOADING CONDITIONS | Strojnícky časopis – Journal of MECHANICAL ENGINEERING | 2019-2020 | 70-1 | 29-38 | Scopus | 1.152 |
| 33 | Sri.S. Ravi Kumar | Processing, micro structures and mechanical properties of AZ91E, Sic and fly ash composites: A review | MATERIALS TODAY PROCEEDINGS | 2019-2020 | 26-2 | 2629-2635 | Scopus | 2.59 |
| 34 | Dr.B.Ratnal Sunil | Producing Al5083-CNT composites by friction stir processing: influence of grain refinement and CNT on mechanical and corrosion properties | Materials Today: proceedings ,(Elsevier, Scopus) | 2019-2020 | 15 | 44-49 | Scopus | 2.59 |
| 35 | Dr.B.Ratnal Sunil | Role of microstructure and secondary phase on corrosion behavior of heat treated AZ series magnesium alloys | Materials Today: proceedings | 2019-2020 | 18 | 175-181 | Scopus | 2.59 |
| 36 | Dr. V.V. Kondaiah | Surface Engineering of ZE 41 Mg Alloy by Friction Stir Processing: Effect of Process Parameters on Microstructure and Hardness Evolution | Materials Today: Proceedings | 2019-2020 | 18 | 125-131 | Scopus | 2.59 |
| 37 | Sri. P. Uma Maheswar Rao | TOPSIS based Optimization of Process Parameters while Hard Turning of AISI 52100 Steel | Acta Mechanica Malaysia | 2019-2020 | 2-2 | 28-31 | Scopus | 2.645 |
***Department of English FDP News***The Department of English in association with ELTAI Guntur Chapter, organizing a 5 Day Virtual International Faculty Development Program (FDP) on “Working with Emotional Intelligence and Life Skills Management (WEILSM).