bec

MECHANICAL DEPARTMENT RESEARCH PUBLICATIONS
Sl. No.Dept.Faculty NameJournal NamePaper TitleVol. details & DateAcad. Year
1MECHSri. A. PraveenA Comparison of Coated and Uncoated Diesel Engine Performance and Emission Characteristics Powered by Chlorella Vulgaris Biodiesel Blend with an Assistance of Alumina Nano AdditiveDoddipalli R. R. reddy Gangula V. Tarigonda H. & PETLA R. K. (2022). A Comparison of Coated and Uncoated Diesel Engine Performance and Emission Characteristics Powered by Chlorella Vulgaris Biodiesel Blend with an Assistance of Alumina Nano Additive (No. 2022-28-0021). SAE Technical Paper.2022
2MECHSri. A. PraveenComparative assessment of MWCNTs and alumina nanoparticles dispersion in biodiesel blend on the engine characteristics of an unmodified DI diesel engineKrupakaran R. L. Rani G. J. Anchupogu P. Reddy G. V. Reddy D. R. & Petla R. K. (2022). Comparative assessment of MWCNTs and alumina nanoparticles dispersion in biodiesel blend on the engine characteristics of an unmodified DI diesel engine. Materials Today: Proceedings 68 1241-1251.2022
3MECHDr. T. NancharaiahFlapwise Vibration of Functionally Graded Rotating Tapered Beam with Tipmassravi KUMAR P. NANCHARAIAH T. KUMAR D. S. KALAM S. A. & BALAKRISHNA G. (2022). Flapwise vibration of functionally graded rotating tapered beam with tipmass. Sigma Journal of Engineering and Natural Sciences 40(3) 640-648.2022
4MECHDr. Ch. Lakshmi SrinivasEstimation of Effect of Cold Forging Deformational Behavior on Al-2024 Alloy Reinforced with Fly-Ash ParticulatesRaju S. Srinivas C. L. Gunji S. R. Srinag T. Shekhar M. C. & Pandi T. (2022). Estimation of Effect of Cold Forging Deformational Behavior on Al-2024 Alloy Reinforced with Fly-Ash Particulates. Advances in Science and Technology 120 3-14.2022
5MECHDr. Ch. Lakshmi SrinivasInvestigations on Wear and Friction Characteristics of AA-2024/MOS2/Al2O3 HMMCsSrinivas C. L. Praveen D. V. Suresh G. Gowtham R. Siddu R. Teja B. R. & Remalli T. B. (2022). Investigations on Wear and Friction Characteristics of AA-2024/MOS2/Al2O3 HMMCs. Advances in Science and Technology 120 41-50.2022
6MECHDr. Ch. Lakshmi SrinivasWEDM Parametric Study on Machining Responses of AA-6082/MoS2/Al2O3 HMMCsSrinivas C. L. Kumar N. B. Brahmaiah N. Kumar P. S. Abhinash P. & Praveen D. V. (2022). WEDM Parametric Study on Machining Responses of AA-6082/MoS2/Al2O3 HMMCs. Advances in Science and Technology 120 117-124.2022
7MECHDr. D. Sameer KumarMicro Structural and Hardness Study of Al 6065 and CaSiO3 Composite with Stir Casting RouteBabu M. A. Yuvaraju M. Babu K. A. Krishna G. R. Kumar D. S. & Kondaiah V. V. (2022). Micro Structural and Hardness Study of Al 6065 and CaSiO3 Composite with Stir Casting Route. Advances in Science and Technology 120 75-79.2022
8MECHDr. D. Sameer KumarParticulate Based AZ91 Magnesium Hybrid Composites – A Short ReviewKumar T. N. Kumar S. V. Krishna V. D. S. Irfan S. M. & Kumar D. S. (2022). Particulate Based AZ91 Magnesium Hybrid Composites–A Short Review. Advances in Science and Technology 120 51-59.2022
9MECHDr. D. Sameer KumarFlapwise vibration of functionally graded rotating tapered beam with tipmassravi KUMAR P. NANCHARAIAH T. KUMAR D. S. KALAM S. A. & BALAKRISHNA G. (2022). Flapwise vibration of functionally graded rotating tapered beam with tipmass. Sigma Journal of Engineering and Natural Sciences 40(3) 640-648.2022
10MECHMr.D.Vijay PraveenMicrostructural Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive ApplicationsVijay Praveen D. Umamaheswar rao P. Narendra Babu Y. & Krugon S. (2023). Microstructural Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive Applications. Silicon 1-13.2022
11MECHDr.B.Ratna SunilA review on developing high performance ZE 41 magnesium alloy by using bulk deformation and surface modification methodsBaral S. K. Thawre M. M. Sunil B. R. & Dumpala R. (2023). A review on developing high-performance ZE41 magnesium alloy by using bulk deformation and surface modification methods. Journal of Magnesium and Alloys.2022
12MECHDr.B.Ratna SunilWear and corrosion behaviour of the cryogenically treated tungsten carbide coatingsGovande A. R. Ratna Sunil B. & Dumpala R. (2023). Wear and corrosion behaviour of the cryogenically treated tungsten carbide coatings. Surface Engineering 1-13.2022
13MECHDr.B.Ratna SunilReciprocating sliding wear behaviour of the heat-treated WC-12Co coatingsGovande A. R. Sunil B. R. & Dumpala R. (2023). Reciprocating sliding wear behavior of the heat-treated WC-12Co coatings. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology 237(4) 798-807.2022
14MECHDr.B.Ratna SunilRole of processing temperature on microstructure mechanical properties and corrosion behavior of fine grained AZ31 magnesium alloy produced by groove pressingKumar E. M. Reddy V. M. Kumar K. P. Reddy M. S. & Ratna Sunil B. (2023). Role of processing temperature on microstructure mechanical properties and corrosion behavior of fine grained AZ31 magnesium alloy produced by groove pressing. Materialwissenschaft und Werkstofftechnik 54(7) 897-904.2022
15MECHDr.B.Ratna SunilEffect of argon gas environment on high temperature sliding wear characteristics of NiCrBSi laser cladJaiswal A. K. Govande A. R. Kiran K. U. V. Sunil B. R. & Dumpala R. (2023). Effect of argon gas environment on high temperature sliding wear characteristics of NiCrBSi laser clad. Materials Today: Proceedings 78 682-687.2022
16MECHDr.B.Ratna SunilComparative investigations on the bioactivity of surface grain refined titanium and surface oxidized titanium for biomedical implant applicationsSatyanarayana C. P. Raju L. S. Raju L. R. Dondapati S. Dumpala R. & Buradagunta R. S. (2022). Comparative Investigations on the Bioactivity of Surface Grain Refined Titanium and Surface Oxidized Titanium for Biomedical Implant Applications.2022
17MECHDr.B.Ratna SunilTemperature dependant sliding wear behaviour of Stellite 6 alloyGurram A. Baral S. K. Sunil B. R. & Dumpala R. (2023). Temperature dependent sliding wear behaviour of Stellite 6 alloy. Materials Today: Proceedings 78 514-519.2022
18MECHDr.B.Ratna SunilMagnesium based alloys and composites: Revolutionized bio degradable temperary implants and strategies to enhance their performanceVenkateswarlu B. Sunil B. R. & Kumar R. S. (2023). Magnesium based alloys and composites: revolutionized biodegradable temporary implants and strategies to enhance their performance. Materialia 101680.2022
19MECHDr.B.Ratna SunilEffect of AC/DC electrical fields on ZnO nano particles kineticsKolen?ík M. Urík M. Les?ák M. Barabaszová K. ?. Bujdoš M. Šebesta M. … & Illa R. (2022). Effect of AC/DC electrical fields on ZnO nanoparticles kinetics. Acta fytotechnica et zootechnica:: ISSN 1336-9245 25(4).2022
20MECHDr.B.Ratna SunilEffect of inert environment on the sliding wear behaviour of the HVOF sprayed WC-12Co CoatingGovande A. R. Tailor S. Sunil B. R. & Dumpala R. (2023). Effect of inert environment on the sliding wear behaviour of the HVOF sprayed WC-12Co coating. International Journal of Refractory Metals and Hard Materials 111 106109.2022
21MECHDr.B.Ratna SunilTribological Characteristics of WC-12Co coating sliding against SiC and SiN Counter ballsGovande A. R. Sunil B. R. & Dumpala R. (2023). Tribological Characteristics of WC-12Co Coatings Sliding Against SiC and Si3N4 Counter Balls. Silicon 1-10.2022
22MECHMr.Y Narendra babuCharacterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditionsNarendra Babu Y. Venkateswara Rao M. & Gopala Krishna A. (2023). Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions. Materialwissenschaft und Werkstofftechnik 54(1) 81-89.2022
23MECHDr.S.KrugonMicrostructural Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive ApplicationsVijay Praveen D. Umamaheswar rao P. Narendra Babu Y. & Krugon S. (2023). Microstructural Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive Applications. Silicon 1-13.2022
24MECHMr.P.Uma maheswara RaoMicrostructural Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive ApplicationsVijay Praveen D. Umamaheswar rao P. Narendra Babu Y. & Krugon S. (2023). Microstructural Mechanical and Wear Characterization of AA-2219/Si3N4/ZrO2/Graphite Hybrid Composites for Automotive Applications. Silicon 1-13.2022
25MECHMr.D.Vijay PraveenInvestigations on Wear and Friction Characteristics of AA-2024/MOS2/Al2O3 HMMCsSrinivas C. L. Praveen D. V. Suresh G. Gowtham R. Siddu R. Teja B. R. & Remalli T. B. (2022). Investigations on Wear and Friction Characteristics of AA-2024/MOS2/Al2O3 HMMCs. Advances in Science and Technology 120 41-50.2022
26MECHMr.D.Vijay PraveenWEDM Parametric Study on Machining Responses of AA-6082/MoS2/Al2O3 HMMCsSrinivas C. L. Kumar N. B. Brahmaiah N. Kumar P. S. Abhinash P. & Praveen D. V. (2022). WEDM Parametric Study on Machining Responses of AA-6082/MoS2/Al2O3 HMMCs. Advances in Science and Technology 120 117-124.2022
27MECHSri. A.PraveenOptimization of Operational Parameters on Engine Performance and Emissions of a Diesel Engine Powered with Mimusops Elengi Methyl Ester with Doped TiO2 Nanoparticle with Varying Injection PressureOptimization of Operational Parameters on Engine Performance and Emissions of a Diesel Engine Powered with Mimusops Elengi Methyl Ester with Doped TiO2 Nanoparticle with Varying Injection Pressure2022
28MECHSri. A.PraveenDispersion Effect of Al2O3 Nanoparticles in Diesel and Hemp Biodiesel Blend on the Engine Parameters of a Diesel EngineElipey M. K. Praveen A. Kondaiah V. V. Dumpala R. Sunil B. R. & Sukumar R. S. (2022 November). Dispersion effect of Al2O3 nanoparticles in diesel and hemp biodiesel blend on the engine parameters of a diesel engine. In AIP Conference Proceedings (Vol. 2648 No. 1). AIP Publishing.2022
29MECHSri. A.PraveenComparative assessment of MWCNTs and alumina nanoparticles dispersion in biodiesel blend on the engine characteristics of an unmodified DI diesel engineKrupakaran R. L. Rani G. J. Anchupogu P. Reddy G. V. Reddy D. R. & Petla R. K. (2022). Comparative assessment of MWCNTs and alumina nanoparticles dispersion in biodiesel blend on the engine characteristics of an unmodified DI diesel engine. Materials Today: Proceedings 68 1241-1251.2022
30MECHDr.T.NancharaiahExperimental optimization on mechanical properties of 18Ni-300 maraging steel produced by direct metal laser sinteringKarlapudy S. P. Nancharaiah T. & Rao V. S. (2023). Experimental optimization on mechanical properties of 18Ni-300 maraging steel produced by direct metal laser sintering. Engineering Research Express 5(1) 015073.2022
31MECHSri. S. VijayComparative Experimental Investigation of Erosion behaviour of AA2024/B4C and AA6061/B4C Metal Matrix Composites with Particulate coatingVijay S. Rao C. S. & Lalitha J. L. (2021). Comparative Experimental Investigation of Erosion behaviour of AA2024/B4C and AA6061/B4C Metal Matrix Composites with Particulate coating. In IOP Conference Series: Materials Science and Engineering (Vol. 1017 No. 1 p. 012027). IOP Publishing.2022
32MECHDr. B. Ratna SunilDeveloping Zn-MgO composites for degradable implant applicationsKumar Y. N. Venkateswarlu B. Raju L. R. Dumpala R. & Sunil B. R. (2021). Developing Zn-MgO composites for degradable implant applications by powder metallurgy route. Materials Letters 302 130433.2021
33MECHDr. B. Ratna SunilDeveloping composites of zinc and hydroxyapatite for degradable orthopedic implant applicationsMahesh P. V. S. Akhil S. Chiranjeevi P. Sivaji Y. Kondaiah V. V. Rao M. A. … & Sunil B. R. (2021 April). Developing composites of zinc and hydroxyapatite for degradable orthopedic implant applications. In IOP Conference Series: Materials Science and Engineering (Vol. 1116 No. 1 p. 012002). IOP Publishing.2021
34MECHDr. B. Ratna SunilSurface functionalized titanium with enhanced bioactivity and antimicrobial properties through surface engineering strategies for bone implant applicationsSunil B. R. Kiran A. S. K. & Ramakrishna S. (2022). Surface functionalized titanium with enhanced bioactivity and antimicrobial properties through surface engineering strategies for bone implant applications. Current Opinion in Biomedical Engineering 23 100398.2021
35MECHDr. B. Ratna SunilMachining behaviour of AZ91E hybrid composite reinforced with granite and fly Ash powdersSingaiah K. Babu G. R. Singaiah G. & Sunil B. R. (2022). Machining behaviour of AZ91E hybrid composite reinforced with granite and fly ash powders. Engineering Research Express 4(1) 015035.2021
36MECHDr. B. Ratna SunilDeveloping Mg based composites for degradable orthopedic implant applications: A reviewBadisha V. Rajulapati S. K. & Buradagunta R. S. (2022). Developing Mg Based Composites for Degradable Orthopedic Implant Applications: A Review. Advances in Science and Technology 120 61-67.2021
37MECHDr. B. Ratna SunilCharacterization of CP-Ti processed by micro arc oxidation for bone implant applicationsSatyanarayana C. P. Ratnaraju L. Raju L. S. Dondapati S. Dumpala R. & Buradagunta R. S. (2022). Characterization of CP-Ti Processed by Micro Arc Oxidation for Bone Implant Applications. Advances in Science and Technology 120 35-40.2021
38MECHDr. B. Ratna SunilDispersion effect of Al2O3 nanoparticles in diesel and hemp biodiesel blend on the engine parameters of a diesel engineElipey M. K. Praveen A. Kondaiah V. V. Dumpala R. Sunil B. R. & Sukumar R. S. (2022 November). Dispersion effect of Al2O3 nanoparticles in diesel and hemp biodiesel blend on the engine parameters of a diesel engine. In AIP Conference Proceedings (Vol. 2648 No. 1). AIP Publishing.2021
39MECHDr. B. Ratna SunilFriction and wear behavior of BN(h) and Ag incorporated nickel phosphorous coatings under dry reciprocating sliding conditions Uday Venkat Kiran K. Ratna Sunil B. & Dumpala R. (2022). Friction and wear behaviour of BN (h) and Ag incorporated nickel phosphorous coatings under dry reciprocating sliding conditions. Tribology-Materials Surfaces & Interfaces 16(1) 23-33.2021
40MECHDr. B. Ratna SunilCarbide-based thermal spray coatings: A review on performance characteristics and post-treatment Govande A. R. Chandak A. Sunil B. R. & Dumpala R. (2022). Carbide-based thermal spray coatings: A review on performance characteristics and post-treatment. International Journal of Refractory Metals and Hard Materials 103 105772.2021
41MECHDr. B. Ratna SunilMachining characteristics of Al6063 composites reinforced with SiC particlesMahanta T. K. Lam R. R. Chakrapani Y. Irulappasamy S. Dumpala R. & Sunil B. R. (2022). Machining characteristics of Al6063 composites reinforced with SiC particles. Materials Today: Proceedings 50 2351-2354.2021
42MECHDr. B. Ratna SunilInvestigation on the role of microstructure and temperature on tribological characteristics of fine grained ZE41 Mg alloyVenkataiah M. Anup Kumar T. Venkata Rao K. Anand Kumar S. Dumpala R. & Ratna Sunil B. (2022). Investigation on the role of microstructure and temperature on tribological characteristics of fine-grained ZE41 Mg alloy. Tribology-Materials Surfaces & Interfaces 16(1) 68-75.2021
43MECHDr. B. Ratna SunilEffect of inert gas environment on the sliding wear behavior of AZ91/B4C surface compositePatle H. Ratna Sunil B. Anand Kumar S. & Dumpala R. (2022). Effects of inert gas environment on the sliding wear behavior of AZ91/B4C surface composites. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology 236(9) 1880-1888.2021
44MECHA SureshRole of heat treatment on machining characteristics and surface roughness of AZ91 Mg alloySuresh A. Nancharaiah T. Dumpala R. & Sunil B. R. (2022). Role of heat treatment on machining characteristics and surface roughness of AZ91 Mg alloy. Materials Today: Proceedings 50 2488-2492.2021
45MECHSri.S. Ravi KumarWear Studies of AZ91-SiC/FA Composites using Taguchi Approach and Artificial Neural Networks (ANN) Fabricated by Stir-Castingkumar Saranu R. Chanamala R. & Putti S. R. (2021). Wear Studies of AZ91-SiC/FA Composites using Taguchi Approach and Artificial Neural Networks (ANN) Fabricated by Stir-Casting. Design Engineering 2531-2555.2021
46MECHSri.S. Ravi KumarWear Behaviour of Magnesium Metal Matrix Hybrid Composites –A Detailed ReviewSaranu R. Chanamala R. & Putti S. (2022). Wear behaviour of magnesium metal matrix hybrid composites–a detailed review. International Journal of Mechanical Engineering 7(1) 1488-1499.2021
47MECHSri. P. Uma Maheswar RaoMachining force comparison for surface defect hard turning and conventional hard turning of AISI 52100 steelUmamaheswarrao P. Rangaraju D. Suman K. N. S. & Ravisankar B. (2021). Machining force comparison for surface defect hard turning and conventional hard turning of AISI 52100 steel. INCAS Bulletin 13(3) 205-214.2021
48MECHDr. P. Ravi KumarMulti response optimization of process parameters in wire-cur EDM on INCONEL 625Umamaheswarrao P. Rangaraju D. Suman K. N. S. & Ravisankar B. (2021). Machining force comparison for surface defect hard turning and conventional hard turning of AISI 52100 steel. INCAS Bulletin 13(3) 205-214.2021
49MECHDr. D. Sameer KumarPreparation And Characterization Of Electroless Ni Coated Nano Alumina Powder Under Different Sensitization – Activation ConditionsDevarakonda S. K. (2021). Preparation and characterization of electroless Ni coated nano alumina powder under different sensitization-activation conditions. Metallurgical and Materials Engineering 27(3) 275-287.2021
50MECHDr. D. Sameer KumarEffectiveness of Shannon Entropy Weight Method on Wear Behaviour Of Polyester/Carbon Fibre Composites Using GRAYellapragada N. V. S. Devarakonda S. K. Dasari K. R. Krishna N. S. R. Thati J. S. A. V. V. & Alapati P. (2022). Effectiveness of Shannon entropy weight method on wear behaviour of polyester/carbon fibre composites using GRA. parameters 13 15.2021
51MECHDr. D. Sameer KumarA Real-Time Autonomous Face-Tracking System Based On A 2-Dof Articulated Manipulator Platform Using Extended Kalman FilterA Real-Time Autonomous Face-Tracking System Based On A 2-Dof Articulated Manipulator Platform Using Extended Kalman Filter2021
52MECHDr. Ch. Lakshmi SrinivasGrey Relational Analysis and Principal Component Analysis Based Optimization Of Process Parameters in Turning of En-8 SteelSrinivas C. L. Rao P. U. Srinag T. & Sekhar M. C. (2022). Grey Relational Analysis and Principal Component Analysis based optimization of process parameters in turning of EN-8 Steel. INCAS Bulletin 14(2) 43-51.2021
53MECHSri.S. Ravi KumarWear Studies of AZ91-SiC/FA Composites using Taguchi Approach and Artificial Neural Networks (ANN) Fabricated by Stir-Castingkumar Saranu R. Chanamala R. & Putti S. R. (2021). Wear Studies of AZ91-SiC/FA Composites using Taguchi Approach and Artificial Neural Networks (ANN) Fabricated by Stir-Casting. Design Engineering 2531-2555.2021
54MECHSri.S. Ravi KumarWear Behaviour of Magnesium Metal Matrix Hybrid Composites –A Detailed ReviewSaranu R. Chanamala R. & Putti S. (2022). Wear behaviour of magnesium metal matrix hybrid composites–a detailed review. International Journal of Mechanical Engineering 7(1) 1488-1499.2021
55MECHDr. T. NancharaiahRole of heat treatment on machining characteristics and surface roughness of AZ91 Mg alloySuresh A. Nancharaiah T. Dumpala R. & Sunil B. R. (2022). Role of heat treatment on machining characteristics and surface roughness of AZ91 Mg alloy. Materials Today: Proceedings 50 2488-2492.2021
56MECHSri. A.PraveenEffect of MWCNTs as nano additives in C. Inophyllum biodiesel blend (CIB20) on the performance and emission parameters of a diesel enginePraveen A. Rani G. J. & Balakrishna B. (2022). Effect of MWCNTs as nano additives in C. Inophyllum biodiesel blend (CIB20) on the performance and emission parameters of a diesel engine. Materials Today: Proceedings 50 2581-2586.2021
57MECHDr. T. NancharaiahInfluence of different build orientation and laser scan strategies on surface quality Mechanical and Material Characteristics of 18 Ni-300 maraging steel processed through DMLSKarlapudy S. P. Nancharaiah T. & Rao V. S. (2021). Influence of different build orientation and laser scan strategies on surface quality Mechanical and Material Characteristics of 18 Ni-300 maraging steel processed through DMLS. Australian Journal of Mechanical Engineering 1-15.2021
58MECHSri. A. PraveenEnhancing diesel engine performance by using nano-dispersing agents in fuel: A reviewElipey M. K. Chandra G. R. Latha P. S. Praveen A. & Sunil B. R. (2021 September). Enhancing diesel engine performance by using nano-dispersing agents in fuel: A review. In IOP Conference Series: Materials Science and Engineering (Vol. 1185 No. 1 p. 012039). IOP Publishing.2021
59MECHSri. A. PraveenAn assessment of the TiO2 nanoparticle concentration in the Cinophyllum biodiesel blend on the engine characteristics of a DI diesel enginePraveen A. Krupakaran R. L. Lakshmi Narayana Rao G. & Balakrishna B. (2022). An assessment of the TiO2 nanoparticle concentration in the C. inophyllum biodiesel blend on the engine characteristics of a DI diesel engine. International Journal of Ambient Energy 43(1) 5464-5477.2021
60MECHDr. Ch. Lakshmi SrinivasGREY RELATIONAL ANALYSIS AND PRINCIPAL COMPONENT ANALYSIS BASED OPTIMIZATION OF PROCESS PARAMETERS IN TURNING OF EN-8 STEELSrinivas C. L. Rao P. U. Srinag T. & Sekhar M. C. (2022). Grey Relational Analysis and Principal Component Analysis based optimization of process parameters in turning of EN-8 Steel. INCAS Bulletin 14(2) 43-51.2021
61MECHSri.S. Ravi KumarCorrosion and tribological behavior of magnesium metal matrix hybrid composites- A reviewSaranu R. Chanamala R. & Putti S. R. (2020 September). Corrosion and tribological behavior of magnesium metal matrix hybrid composites-A review. In AIP Conference Proceedings (Vol. 2259 No. 1). AIP Publishing.2020
62MECHDr. T. NancharaiahInfluence of Canola Oil on The Emission and Performance Characteristics of Four Stroke Diesel Engine as A Bio FuelT. Nancharaiah P. Ravi Kumar & D. Sameer KumarInfluence 2021 Influence of Canola Oil on The Emission and Performance Characteristics of Four Stroke Diesel Engine as A Bio Fuel International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)Mechanical and Production Engineering Research and Development (IJMPERD)2020
63MECHDr. Ch. Lakshmi SrinivasInvestigation of the effect of micro-fillers on Viscoelastic and Erosion wear Characteristics of PTFE compositesSuresh G. Ch L. S. & Sekhar M. C. Investigation of the effect of micro-fillers on Viscoelastic and Erosion wear Characteristics of PTFE composites.2020
64MECHDr. D. Sameer KumarINFLUENCE OF CANOLA OIL ON THE EMISSION AND PERFORMANCE CHARACTERISTICS OF FOUR STROKE DIESEL ENGINE AS A BIO FUELT. Nancharaiah P. Ravi Kumar and D. Sameer Kumar (2021) INFLUENCE OF CANOLA OIL ON THE EMISSION AND PERFORMANCE CHARACTERISTICS OF FOUR STROKE DIESEL ENGINE AS A BIO FUEL2020
65MECHDr. D. Sameer KumarA study on the impact and fatigue failure of AZ91E–Ni coated alumina compositesSameer Kumar D. Suman K. N. S. & Poddar P. (2020). A study on the impact and fatigue failure of AZ91E–Ni coated alumina composites. Canadian Metallurgical Quarterly 59(3) 316-323.2020
66MECHSri. S. KrugonOn the Optimality of Inventory and Shipment Policies in a Two echelon Supply Chain under Trade Credit with Finite Production RateNagaraju D. Kumar B. K. & Narayanan S. (2020). On the optimality of inventory and shipment policies in a two-level supply chain under quadratic price dependent demand. International Journal of Logistics Systems and Management 35(4) 486-510.2020
67MECHSri. S. KrugonAn Integrated Method Using Fuzzy AHP and TOPSIS Method for Supplier Selection in Recycled Lubricating Oil Industry for GSCMReddy S. V. (2020). An Integrated Method Using Fuzzy AHP and TOPSIS Method for Supplier Selection in Recycled Lubricating Oil Industry for GSCM.2020
68MECHSri. A.PraveenNano fluids effect on crossflow heat exchanger characteristics – ReviewRani G. J. Rani G. S. & Praveen A. (2021). Nano fluids effect on crossflow heat exchanger characteristics–Review. Materials Today: Proceedings 44 527-531.2020
69MECHDr. D. Sameer KumarRECENT STUDIES ON PARTICULATE REINFORCED AZ91 MAGNESIUM COMPOSITES FABRICATED BY STIR CASTING – A REVIEWMatta A. K. Koka N. S. & Devarakonda S. K. (2020). Recent studies on particulate reinforced AZ91 magnesium composites fabricated by stir casting–a review. Journal of Mechanical and Energy Engineering 4(2) 115-126.2020
70MECHSri. P. Uma Maheswar RaoApplication of TOPSIS for multi response optimization of Process Parameters in dry hard turning of AISI 52100 steelUmamaheswarrao P. Rangaraju D. Suman K. N. S. & Ravisankar B. (2021). Application of TOPSIS for multi response optimization of Process Parameters in dry hard turning of AISI 52100 steel. INCAS Bulletin 13(1) 211-224.2020
71MECHSri. P. Uma Maheswar RaoEXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF CUTTING AND TOOL GEOMETRY PARAMETERS OVER THE MACHINABILITY OF AISI 52100 STEEL IN HARD TURNINGPonugoti U. Dantuluri R. R. Koka N. S. S. & Bhuvanagiri R. S. (2020). Experimental investigations on the influence of cutting and tool geometry parameters over the machinability of AISI 52100 steel in hard turning. International Journal of Modern Manufacturing Technologies 12(1) 144-156.2020
72MECHSri. P. Uma Maheswar RaoA Review on Submerged Friction Stir Welding of Light Weight AlloysSucharitha M. Sankar B. R. & Umamaheswarrao P. (2020 October). A review on submerged friction stir welding of light weight alloys. In IOP Conference Series: Materials Science and Engineering (Vol. 954 No. 1 p. 012014). IOP Publishing.2020
73MECHDr. B. Ratna SunilMachining characteristics wear and corrosion behavior of AZ91 magnesium alloy – fly ash composites produced by friction stir processing Patle H. Sunil B. R. & Dumpala R. (2021). Machining characteristics wear and corrosion behavior of AZ91 magnesium alloy?fly ash composites produced by friction stir processing. Materialwissenschaft und Werkstofftechnik 52(1) 88-99.2020
74MECHDr. B. Ratna SunilSynthesis characterization and antimicrobial properties of strontium substituted hydroxyapatiteKumar B. K. S. Jagannatham M. Venkateswarlu B. Dumpala R. & Sunil B. R. (2021). Synthesis characterization and antimicrobial properties of strontium-substituted hydroxyapatite. Journal of the Australian Ceramic Society 57 195-204.2020
75MECHDr. B. Ratna SunilRole of plunge depth on the joint formation and mechanical behavior of Al6063 AZ91 dissimilar lap joint produced by friction stir welding Supriyanka R. Kondaiah V. V. Raju L. R. Dumpala R. & Ratna Sunil B. (2021). Role of plunge depth on the joint formation and mechanical behavior of Al6063?AZ91 dissimilar lap joint produced by friction stir welding. Materialwissenschaft und Werkstofftechnik 52(1) 111-121.2020
76MECHDr. B. Ratna SunilZinc-calcium silicate composites produced by ball milling and sintering for degradable implant applicationsSrikar P. Sathish T. Khan P. I. Reddy Y. K. Kondaiah V. V. Rao M. A. … & Sunil B. R. (2021). Zinc-calcium silicate composites produced by ball milling and sintering for degradable implant applications. Materials Today: Proceedings 44 1584-1588.2020
77MECHDr. B. Ratna SunilDeveloping composites of zinc and hydroxyapatite for degradable orthopedic implant applicationsMahesh P. V. S. Akhil S. Chiranjeevi P. Sivaji Y. Kondaiah V. V. Rao M. A. … & Sunil B. R. (2021 April). Developing composites of zinc and hydroxyapatite for degradable orthopedic implant applications. In IOP Conference Series: Materials Science and Engineering (Vol. 1116 No. 1 p. 012002). IOP Publishing.2020
78MECHDr. B. Ratna SunilZinc substituted hydroxyapatite: Synthesis structural analysis and antimicrobial behaviourIrfan M. Sultana S. N. Venkateswarlu B. Jagannatham M. Dumpala R. & Sunil B. R. (2021). Zinc-substituted hydroxyapatite: synthesis structural analysis and antimicrobial behavior. Transactions of the Indian Institute of Metals 74(9) 2335-2344.2020
79MECHDr. D. Sameer KumarEstimation of lattice strain in lanthanum hexa aluminate nanoparticles using X-ray peak profile analysisYellapragada N. V. S. R. Cherukuri T. S. Jayaraman P. & Devarakonda S. K. (2021). Estimation of Lattice Strain in Lanthanum Hexa Aluminate Nanoparticles Using X-Ray Peak Profile Analysis. Revue des Composites et des Matériaux Avancés 31(1).2020
80MECHDr. P. Ravi KumarDynamic Analysis Of Hydraulic Actuated MandrelSd. Abdul Kalam G. Bala Krishna P. Ravi Kumar T. Arun Kumar (2021) Dynamic Analysis Of Hydraulic Actuated Mandrel Turkish Journal of Computer and Mathematics Education2020
81MECHDr. B. Ratna SunilEffect of heat treatment on mechanical and tribological characteristics of Electroless Ni-P depositsArora A. Kiran K. U. V. Ramakrishnan B. Sunil B. R. & Dumpala R. (2019 November). Effect of heat treatment on mechanical and tribological characteristics of Electroless Ni-P deposits. In Journal of Physics: Conference Series (Vol. 1355 No. 1 p. 012032). IOP Publishing.2020
82MECHDr. B. Ratna SunilEffect of heat treatment on microstructure microhardness and corrosion resistance of ZE41 Mg alloySyam P. U. Kondaiah V. V. Akhil K. Kumar V. V. Nagamani B. Jhansi K. … & Ratna S. B. (2019). Effect of heat treatment on microstructure microhardness and corrosion resistance of ZE41 Mg alloy. Koroze a ochrana materiálu 63(2) 79-85.2020
83MECHDr. B. Ratna SunilTuning the Morphology and State of Aggregation of Fullerene C60 Using Non-ionic SurfactantsRamakanth I. Kolen?ík M. Rao M. S. Sunil B. R. Vijayasree U. Durgababu G. … & Siva T. (2021). Tuning the Morphology and State of Aggregation of Fullerene C 60 using Non-ionic Surfactants. Colloid Journal 83 474-482.2020
84MECHDr. B. Ratna SunilInvestigation on the role of microstructure and temperature on tribological characteristics of fine grained ZE41 Mg alloyVenkataiah M. Anup Kumar T. Venkata Rao K. Anand Kumar S. Dumpala R. & Ratna Sunil B. (2022). Investigation on the role of microstructure and temperature on tribological characteristics of fine-grained ZE41 Mg alloy. Tribology-Materials Surfaces & Interfaces 16(1) 68-75.2020
85MECHDr. B. Ratna SunilEffect of inert gas environment on the sliding wear behavior of AZ91/B4C surface compositePatle H. Ratna Sunil B. Anand Kumar S. & Dumpala R. (2022). Effects of inert gas environment on the sliding wear behavior of AZ91/B4C surface composites. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology 236(9) 1880-1888.2020
86MECHDr. B. Ratna SunilZinc-calcium silicate composites produced by ball milling and sintering for degradable implant applicationsSrikar P. Sathish T. Khan P. I. Reddy Y. K. Kondaiah V. V. Rao M. A. … & Sunil B. R. (2021). Zinc-calcium silicate composites produced by ball milling and sintering for degradable implant applications. Materials Today: Proceedings 44 1584-1588.2020
87MECHDr. B. Ratna SunilMicrohardness and frictional characteristics of cryogenically treated carbide coatingsGovande A. R. Chandak A. Sunil B. R. & Dumpala R. (2021). Microhardness and frictional characteristics of cryogenically treated carbide coatings. Materials Today: Proceedings 47 3112-3116.2020
88MECHDr. B. Ratna SunilSliding Wear Characteristics of Silver Particles Incorporated Electroless Nickel Phosphorus Composite CoatingsRamakrishnan B. Uday Venkat Kiran K. Ratna Sunil B. & Dumpala R. (2020). Sliding wear characteristics of silver particles incorporated electroless nickel phosphorus composite coatings. In Advances in Mechanical Engineering: Select Proceedings of ICAME 2020 (pp. 823-829). Singapore: Springer Singapore.2020
89MECHDr. B. Ratna SunilEffect of Friction Stir Processing on the Sliding Wear Characteristics of AZ91 Mg AlloyPatle H. Uday Venkat Kiran K. Ratna Sunil B. & Dumpala R. (2020). Effect of Friction Stir Processing on the Sliding Wear Characteristics of AZ91 Mg Alloy. In Advances in Mechanical Engineering: Select Proceedings of ICAME 2020 (pp. 663-669). Singapore: Springer Singapore.2020
90MECHDr. B. Ratna SunilEffect of cryogenic treatment duration on the microhardness and tribological behavior of 40CrMoV5 tool steelThakurai R. Patle H. Sunil B. R. & Dumpala R. (2021). Effect of cryogenic treatment duration on the microhardness and tribological behavior of 40CrMoV5 tool steel. Materials Today: Proceedings 38 2140-2144.2020
91MECHDr. T. NancharaiahMulti response optimization of process parameters in wire-cut EDM on INCONEL 625 Multi response optimization of process parameters in wire-cut EDM on INCONEL 625 2020
92MECHSri.S. Ravi KumarInvestigation of Microstructures Mechanical Properties of AZ91E Hybrid Composite Reinforced with Silicon Carbide and Fly AshSaranu R. K. Chanamala R. Putti S. R. & Mallarapu G. K. (2021). Investigation of microstructures mechanical properties of AZ91E hybrid composite reinforced with silicon carbide and fly ash. Silicon 13 2145-2156.2020
93MECHDr. V.V. KondaiahRole of plunge depth on the joint formation and mechanical behavior of Al6063-AZ91 dissimilar lap joint produced by friction stir weldingSupriyanka R. Kondaiah V. V. Raju L. R. Dumpala R. & Ratna Sunil B. (2021). Role of plunge depth on the joint formation and mechanical behavior of Al6063?AZ91 dissimilar lap joint produced by friction stir welding. Materialwissenschaft und Werkstofftechnik 52(1) 111-121.2020
94MECHSri. D. Vijay PraveenAssessment of Optimal Parameters of Wire EDM on Ni?Coated Al2O3p/ AA7075 MMCs Using PCA Coupled GRAVijay Praveen D. Ranga Raju D. & Jagannadha Raju M. V. (2021). Assessment of optimal parameters of wire EDM on Ni-coated Al2O3p/AA7075 MMCs using PCA coupled GRA. Arabian Journal for Science and Engineering 46(8) 7953-7966.2020
95MECHSri. P. Uma Maheswar RaoExperimental study on drilling force during drilling of AZ91D Magnesium alloy Umamaheswarrao P. Sankar B. R. Pardhasaradhi M. & Rajasekharababu K. (2021). Experimental study on drilling force during drilling of AZ91D magnesium alloy. Materials Today: Proceedings 44 305-308.2020
96MECHDr. V.V. KondaiahRole of plunge depth on the joint formation and mechanical behavior of Al6063-AZ91 dissimilar lap joint produced by friction stir weldingSupriyanka R. Kondaiah V. V. Raju L. R. Dumpala R. & Ratna Sunil B. (2021). Role of plunge depth on the joint formation and mechanical behavior of Al6063?AZ91 dissimilar lap joint produced by friction stir welding. Materialwissenschaft und Werkstofftechnik 52(1) 111-121.2020
97MECHDr. V.V. KondaiahMECHANICAL BEHAVIOR AND CHARACTERIZATION OF STIR CASTED AZ31-CaSiO3 METAL MATRIX COMPOSITESBabu P. S. Narayana K. L. & Kondaiah V. V. (2020). Mechanical Behavior And Characterization Of Stir Casted AZ31-CaSiO3 Metal Matrix Composites. International Journal Of Mechanical And Production Engineering Research And Development (IJMPERD) ISSN (P) 2249-6890.2020
98MECHDr. V.V. KondaiahCorrosion Behaviour of Stir Casted AZ31 Magnesium AlloyCaSiO3 Compositesin an Aqueous SolutionBabu P. S. Narayana K. L. & Kondaiah V. V. (2020). Corrosion behaviour of stir casted AZ31 magnesium alloy-CaSiO3 composites in an aqueous solution. International Journal of Advanced Science and Technology 29(5) 2333-2345.2020
99MECHSri.S. Ravi KumarReview of Magnesium Metal Matrix CompositesSaranu R. Chanamala R. & Putti S. (2020 November). Review of Magnesium Metal Matrix Composites. In IOP Conference Series: Materials Science and Engineering (Vol. 961 No. 1 p. 012001). IOP Publishing.2020
100MECHSri.S. Ravi KumarInvestigation of Microstructures Mechanical Properties of AZ91E Hybrid Composite Reinforced with Silicon Carbide and Fly AshSaranu R. K. Chanamala R. Putti S. R. & Mallarapu G. K. (2021). Investigation of microstructures mechanical properties of AZ91E hybrid composite reinforced with silicon carbide and fly ash. Silicon 13 2145-2156.2020
101MECHSri.S. Ravi KumarCorrosion and tribological behavior of magnesium metal matrix hybrid composites- A reviewSaranu R. Chanamala R. & Putti S. R. (2020 September). Corrosion and tribological behavior of magnesium metal matrix hybrid composites-A review. In AIP Conference Proceedings (Vol. 2259 No. 1). AIP Publishing.2020
102MECHSri.S. Ravi KumarCondition monitoring of roller bearingsS. Ravi Kumar (2020) Condition monitoring of roller bearings AIP Conference Proceedings2020
103MECHDr. V.V. KondaiahEXPERIMENTAL INVESTIGATION OF DRY SLIDING WEAR BEHAVIOUR OF STIR CASTED AZ31 MAGNESIUM ALLOY-CASIO3 METAL MATRIX COMPOSITESBabu P. S. Narayana K. L. & Kondaiah V. V. (2020). Experimental investigation of dry sliding wear behaviour of stir casted AZ31 magnesium alloy-casio3 metal matrix composites. J. Crit. Rev. 7(13) 11-19.2020